First post, by Ganz-HUNGARY
The working BEST solution for MT-32 (or compatible like CM-32L)
The computer 1st. is a Dos-based computer, and the 2nd. is running munt.
You will need:
-2 piece of DB-15 Male connector
-1 meter, minimum 4 wire Alarm-cable
-Soldering iron
-MUNT installed on the 2nd. computer
-MPU-401 compatible card in both computers.
Step-by-Step:
1.: Create the cable:
PC to PC MIDI cable:
Connect MIDITXD to MIDIRXD line
MidiRXD 15, and 12 MidiTXD are Crosslinked!!!!
Both 15 pin D-SUB male connectors
2.: Plug the cabels into the Computers.
DO NOT CONNECT COMPUTERS WHILE TURNED ON!!!!
ITS NOT HOT-PLUG CABLE!! (I killed a soundcard with hotpluging! After attached the cables, You can turn on the computers.
3.: Now, Configure MUNT.
Open munt, Browse for the rom, than test the rom (PCM&Control), Than you can setup, as the following steps:
First open Munt, than go to Tool menu, than select New MIDI port.
Second, Select the midi input device:
And Press OK, than you have the floowing screen. Thats all, with this computer.
4.: Go to the 1st computer, and set your compatible sound card (for example, SoundBlaster AWE64) MPU-401 IRQ to H330.
And run a game, to test it out.
The idea by Ganz-HUNGARY
The connection diagramm by Scorpy.