P5I430VX-250DM Explorer II - problem \ VOGONS

P5I430VX-250DM Explorer II - problem

Topic actions

First post, by mp10

Posted on 2014-02-25, 20:51

mp10 Offline

Rank Newbie

Rank: Newbie
Posts: 66
Joined: 2013-11-02, 01:51

I have a P5I430VX-250DM Explorer II motherboard with a Pentium 166. At this moment i want to test a Pentium 200 MMX, for this i need to change the voltage, CPU type and CPU frequency. However the motherboard doesn't have jumpers... This is normal? 😁
Motherboard manual: http://www.elhvb.com/mobokive/archive/Qdi%20- … ls/430vxe22.pdf

how i can modify this values?

Thank you

Reply 1 of 4, by Skyscraper

Posted on 2014-02-25, 20:54

Skyscraper Offline

Rank l33t

Rank: l33t
Posts: 3582
Joined: 2013-09-18, 15:36
Location: Sweden

Get jumpers.
As long as the jumper headers are still there.

New PC: i9 12900K @5GHz all cores @1.2v. MSI PRO Z690-A. 32GB DDR4 3600 CL14. 3070Ti.
Old PC: Dual Xeon X5690@4.6GHz, EVGA SR-2, 48GB DDR3R@2000MHz, Intel X25-M. GTX 980ti.
Older PC: K6-3+ 400@600MHz, PC-Chips M577, 256MB SDRAM, AWE64, Voodoo Banshee.

Reply 2 of 4, by mp10

Posted on 2014-02-25, 21:18

mp10 Offline

Rank Newbie

Rank: Newbie
Posts: 66
Joined: 2013-11-02, 01:51

Skyscraper wrote:
Get jumpers.
As long as the jumper headers are still there.

there is no place to put the jumpers...

Reply 3 of 4, by Skyscraper

Posted on 2014-02-25, 21:46

Skyscraper Offline

Rank l33t

Rank: l33t
Posts: 3582
Joined: 2013-09-18, 15:36
Location: Sweden

Then I guess you have to solder headers to the board.
Or find another board.
I can not see any empty spots for extra VRMs so I think you have what you need in that regard.

Last edited by Skyscraper on 2014-02-25, 21:50. Edited 1 time in total.

Reply 4 of 4, by mp10

Posted on 2014-02-25, 21:50

mp10 Offline

Rank Newbie

Rank: Newbie
Posts: 66
Joined: 2013-11-02, 01:51

:\
any suggestions for a new motherboard (socket 7)?

Go to top of page Go to top of page

Back to General Old Hardware