bristlehog wrote:Not working? Do you have problems just in DOS or anywhere?
I've tested in DOS:
- after clean boot all games detect sb pro/wss + opl3, but I don't hear any sound. Manually selected mpu401 - get sound from onboard kurzweil.
- after start dos driver "ad1815_6.exe" - it show all detected resources/pors/irqs. Games - same, all detected, but no sound.
- mixer utility "mixapext.exe" show all volumes at middle level (4 from 8), but can't change it - any volume manipulations not affect anything, and they stay at 4 if you exit and run it again.
In windows 98:
- all drivers and resources detected right (dac, joystic, mpu, ...), no conflicts, no errors.
- windows media player and "apex rack" look like they play wav/midi files - but no sound. Only if I select mpu-401 - i hear midi from kurzweil.
- windows mixer and "apex rack" mixer not affect any volumes:
1) sound from mpu401(kurzweil) not changed in any case.
2) still no sound from other sources,
3) usually if you mute/unmute all volumes, you can hear difference in noise level, but not on this card, noise level is not changed (It's not high. But you can hear it, if you make maximum volume on amplifier)
I recheck board on different computer in a day or two, to exclude any strange incompatibility, but this is my main pc for sound tests and all sound board from my collection work ok.
Pentium2 450/256mb/4gb/ati rage 128+voodoo2/SB awe32 8mb+db50xg/GUS PnP 8mb/TB Tropez 2mb
486 DX2-66/32mb/8gb/tseng4000 2mb/SB 16+WB/GUS 1mb/LAPC-I
286 12mhz/4mb/512mb/Vga 1mb/SB 2.0+Covox
PegasosII G4 / Amiga 4000 / Amiga1200 / Amiga 600