First post, by 386SX
Hi,
I recently bought this Sataraid pci card with 4 sata connections and compatibility with old Win 98 os. The nice thing is that the card show it's own detection bios after the IDE check at post so it can see my 64GB SSD even in a VP3 mainboard that could not boot to raid disk with a cheaper sata card.
By the way the native boot go flawless until the first reboot after win98 files copying. At the first reboot (choosing hard drive boot) it hang at win98 screen and after resetting if you try again it found error in iosubsys.something...
The config is K6-3 400, 5AGM2 MVP3 mobo, 384MB PC100, Voodoo3 3000 etc. With a IDE usual drive it boot ok so it's the ssd/raid card the problem. I thought the size of the HD was too much so I partitioned with lower 32GB active one and tried again with no solution.
Any advices?
Thank