FIC 486-GIO-VP no cache detected \ VOGONS

FIC 486-GIO-VP no cache detected

Topic actions

First post, by marquisor

Posted on 2016-10-02, 19:36

marquisor Offline

Rank Newbie

Rank: Newbie
Posts: 28
Joined: 2011-10-13, 11:42
Location: Germany

Hi there!

I wonder what the correct settings for AMD-X5-133 on this board are?! I use it with a voltage adapter in CPU socket, not on the VRM. The CPU shows up as DX2 133 MHz, boots and all fine, but NO L2 cache is detected. After POST summary says "None", also speedsys doesn't show L2 in memory test.

Tried all possible jumper settings. The BANK 0 and TAG BANK is filled with cache chips. So it must have 128 KB L2 Cache.
I used this document: http://stason.org/TULARC/pc/motherboards/F/FI … GIO-VP-127.html

BIOS is from 1994.

Any hints?

Reply 1 of 1, by kanecvr

Posted on 2016-10-03, 00:00

kanecvr Offline

Rank Oldbie

Rank: Oldbie
Posts: 1957
Joined: 2015-04-22, 20:30
Location: Bucharest, Romania

See if the chips are correctly inserted and oriented. A good picture of your motherboard would help.

Go to top of page Go to top of page

Back to General Old Hardware