AUDIO - Nuked OPL3 Patch for DOSBox(+Windows build) (SDL1)

Here you can discuss the development of patches.

Re: Nuked OPL3 Patch for DOSBox(+Windows build)

Postby nukeykt » 2017-6-10 @ 18:11

Battler wrote:So basically, all I need to do is not map the high bank, and that's it?

Yes. For single OPL2 it's enough. But you should emulate somehow Dual OPL2.
nukeykt
Newbie
 
Posts: 97
Joined: 2013-8-28 @ 11:11
Location: Russia

Re: Nuked OPL3 Patch for DOSBox(+Windows build)

Postby Battler » 2017-6-10 @ 18:45

The emulator already has something for that, opl2_r read/write and opl2_l read/write, each going to its own OPL2 chip. Hopefully I can just reuse that.
Battler
Newbie
 
Posts: 71
Joined: 2014-3-22 @ 21:27

Re: Nuked OPL3 Patch for DOSBox(+Windows build)

Postby James-F » 2017-7-31 @ 06:43

Hi nukeykt.
Will NukedOPL v2.0 be available as a patch?
User avatar
James-F
Oldbie
 
Posts: 1427
Joined: 2015-11-30 @ 04:10

Re: Nuked OPL3 Patch for DOSBox(+Windows build)

Postby nukeykt » 2017-8-01 @ 15:29

James-F wrote:Hi nukeykt.
Will NukedOPL v2.0 be available as a patch?

Yes. When i'll finish it.
nukeykt
Newbie
 
Posts: 97
Joined: 2013-8-28 @ 11:11
Location: Russia

Re: Nuked OPL3 Patch for DOSBox(+Windows build)

Postby FM-OPL-Midi-Freak » 2017-8-21 @ 18:47

Hello all!

please, can anyone tell me, how can install the patch file, the content of the"dosbox-nuked-opl.zip" I just replaced with the original dosbox.exe and the corresponding *.dll´s "SDL_net / SDL.dll,

For answer I am grateful ;-)

Greets
Matthias
Equipment:
- ESS Solo (PCI)
- Ess Audio Drive-Compaq (ISA)
- Soundblaster 2.0
-Audioblaster Pro 4.0 at the time puplished by CPS Hamburg

-Sw1000XG / Motif XF - my treasures ;-) beside the Cockaigne of fm synt synthesis / adlib
FM-OPL-Midi-Freak
Newbie
 
Posts: 15
Joined: 2012-10-03 @ 08:35
Location: Germany

Re: AUDIO - Nuked OPL3 Patch for DOSBox(+Windows build) (SDL1)

Postby Uriel_Dagda » 2017-12-03 @ 04:09

I'm using the DOSBOX ECE... I'm using my old DOSBOX conf file that was made by GoG for World of Xeen--- is oplemu the same as oplmode?
Uriel_Dagda
Newbie
 
Posts: 17
Joined: 2013-6-21 @ 19:16

Re: AUDIO - Nuked OPL3 Patch for DOSBox(+Windows build) (SDL1)

Postby NewRisingSun » 2017-12-03 @ 04:17

nukeykt, I noticed something when I used the YM3812-bearing CT1320 in my Tandy 1000 TX.

Most documentation states that the YM3812 can be distinguished from the YMF262 by reading the index port; a YM3812 supposedly always returns 0x06, while an YMF262 supposedly always returns 0x00. Well, on the Tandy 1000 TX, reading the index port only returns 0x06 if you write a byte with bits 1 and 2 set immediately to it before! Unlike standard ATs, the Tandy 1000 TX does not pull "open bus" bits high. That also manifests itself in reads from unmapped I/O ports returning whatever just happens to be on the bus, while on a standard AT, reading unmapped I/O ports always returns 0xFF.

Can you confirm that on the YM3812, index port bits 1 and 2 are open bus rather than "1" bits from the chip side?
NewRisingSun
Oldbie
 
Posts: 781
Joined: 2005-9-02 @ 02:26

Re: AUDIO - Nuked OPL3 Patch for DOSBox(+Windows build) (SDL1)

Postby nukeykt » 2018-3-30 @ 10:41

Nuked OPL3 v1.8 is out.
Changelog:
* New envelope generator.
* Rhythm mode emulation is 100% correct now.

These and other aspects of chip have been verified on YMF262 die shot, so emulation should be perfect now.

P.S. For some reason i can't edit topic's header. So i'll attach patch here.
You do not have the required permissions to view the files attached to this post.
nukeykt
Newbie
 
Posts: 97
Joined: 2013-8-28 @ 11:11
Location: Russia

Re: AUDIO - Nuked OPL3 Patch for DOSBox(+Windows build) (SDL1)

Postby appiah4 » 2018-3-30 @ 11:04

Can this be somehow used with the stable branch of Dosbox instead of SVN? I really don't like messing with SVN most of the time..
1991:A500R6|512K+RTC|ACA500+|HxC/df1|C1084S
1994:PCI597-1|P133|32M|Trio64|ES1868/S2
1997:S1573S|K6-2/400|64M|M220|V2/SLI|CT4500/32M
2000:GA-BX2000|PIII-700E|512M|GF2GTS|MX300
2004:K8V-MX|S64-3000+|1.5G|R9800|SB0350
User avatar
appiah4
Oldbie
 
Posts: 1571
Joined: 2017-2-19 @ 07:36

Re: AUDIO - Nuked OPL3 Patch for DOSBox(+Windows build) (SDL1)

Postby nukeykt » 2018-3-30 @ 11:09

appiah4 wrote:Can this be somehow used with the stable branch of Dosbox instead of SVN? I really don't like messing with SVN most of the time..

Yes. But you have to apply these changes to the source code manually.
nukeykt
Newbie
 
Posts: 97
Joined: 2013-8-28 @ 11:11
Location: Russia

Re: AUDIO - Nuked OPL3 Patch for DOSBox(+Windows build) (SDL1)

Postby appiah4 » 2018-3-30 @ 11:15

nukeykt wrote:
appiah4 wrote:Can this be somehow used with the stable branch of Dosbox instead of SVN? I really don't like messing with SVN most of the time..

Yes. But you have to apply these changes to the source code manually.

This would go way above my head I'm afraid. Would be very glad if you can build the patch for the stable version as well :) Thanks anyway.
1991:A500R6|512K+RTC|ACA500+|HxC/df1|C1084S
1994:PCI597-1|P133|32M|Trio64|ES1868/S2
1997:S1573S|K6-2/400|64M|M220|V2/SLI|CT4500/32M
2000:GA-BX2000|PIII-700E|512M|GF2GTS|MX300
2004:K8V-MX|S64-3000+|1.5G|R9800|SB0350
User avatar
appiah4
Oldbie
 
Posts: 1571
Joined: 2017-2-19 @ 07:36

Re: AUDIO - Nuked OPL3 Patch for DOSBox(+Windows build) (SDL1)

Postby nukeykt » 2018-3-30 @ 11:22

appiah4 wrote:This would go way above my head I'm afraid. Would be very glad if you can build the patch for the stable version as well :) Thanks anyway.

I'll give a shot then.
nukeykt
Newbie
 
Posts: 97
Joined: 2013-8-28 @ 11:11
Location: Russia

Re: AUDIO - Nuked OPL3 Patch for DOSBox(+Windows build) (SDL1)

Postby nukeykt » 2018-3-30 @ 11:52

Here's windows builds. I've accidantly attached older build above and can't edit it.
You do not have the required permissions to view the files attached to this post.
nukeykt
Newbie
 
Posts: 97
Joined: 2013-8-28 @ 11:11
Location: Russia


Re: AUDIO - Nuked OPL3 Patch for DOSBox(+Windows build) (SDL1)

Postby Yesterplay80 » 2018-4-03 @ 11:16

Thank you, nukeyt! DOSBox ECE was updated with your new version, as of r4088.2 it now includes version 1.8 of your Nuked OPL emu.
My full-featured DOSBox SVN builds (without debugger) for Windows: Vanilla DOSBox and DOSBox ECE (Enhanced Community Edition)
User avatar
Yesterplay80
Member
 
Posts: 297
Joined: 2016-2-23 @ 11:02
Location: Germany

Previous

Return to DOSBox Patches

Who is online

Users browsing this forum: tlk and 1 guest