i find this board, but dont have any model indetification, besides the bios and Toshiba sticker chip.
The cpu is a AMD 386 DX.
Retro rig 1: Asus CUV4X, VIA c3 800, Voodoo Banshee (Diamond fusion) and SB32 ct3670.
Retro rig 2: Intel DX2 66, SB16 Ct1740 and Cirrus Logic VLB.
Have a look at this site: http://arvutimuuseum.ee/th99/#1.
You might be able to identify your motherboard by comparing the layout to the other motherboards.
However, based on the pictures that you've uploaded, I would say that this is only a 386 motherboard - it might support the Cyrix/TI 486DLC CPU's but, there are no 486 sockets (the unpopulated socket is for your math co-processor).
PC Chips M321.
"Will the highways on the internets become more few?" -Gee Dubya
V'Ger XT|Upgraded AT|Ultimate 386|Super VL/EISA 486|SMP VL/EISA Pentium
Thanks for the help!
Retro rig 1: Asus CUV4X, VIA c3 800, Voodoo Banshee (Diamond fusion) and SB32 ct3670.
Retro rig 2: Intel DX2 66, SB16 Ct1740 and Cirrus Logic VLB.
I need same help. Recently acquired Generic 386 Mainboard, 82C391 chipset, amd DX-40. Tried to find some documentation about this board and couldn't. Needs manual for jumper cache settings. Please help!
maksg wrote on 2021-08-14, 04:53:I need same help. Recently acquired Generic 386 Mainboard, 82C391 chipset, amd DX-40. Tried to find some documentation about this board and couldn't.
I looked for your board at Ultimate Hardware 19, the intended TH99 successor. I searched for that board using the filter "1 8-bit ISA slot", "6 16-bit ISA slots", "AMI BIOS". I didn't dare to include the Opti chipset into the filter, as I was afraid of missing your board in case it is categorized as "chipset unknown". Turns out, that fear was uncalled for, and if I had included the Chipset, there would have been only one result after filtering.
Your board is (a clone of?) the Shuttle HOT-307H: http://www.win3x.org/uh19/motherboard/show/4425
Thanks a lot! This is what I looked for.
can u dump the BIOS in case is the version 1.x and better full pic for complete the DB
http://www.win3x.org/uh19/motherboard/result/?name=M321
thx
dataino.it wrote on 2021-08-14, 17:21:can u dump the BIOS in case is the version 1.x and better full pic for complete the DB
can you suggest any app for this? because ROM soldered right to mother... I have ROM reader TL866, but not sure this is good idea to desoldering it. maybe will try later...
maksg wrote on 2021-08-14, 17:50:can you suggest any app for this? because ROM soldered right to mother... I have ROM reader TL866, but not sure this is good idea to desoldering it. maybe will try later...
Leave it soldered. On this forum, the usual recommendation to dump the ROM is NSSI.
dataino.it wrote on 2021-08-14, 17:21:can u dump the BIOS in case is the version 1.x and better full pic for complete the DB
http://www.win3x.org/uh19/motherboard/result/?name=M321
thx
Be careful! There are two boards in this thread. The recent activity is about the Shuttle HOT-307H, your link points to the board originally discussed in the thread.
Ops sorry i only read the start of tread , the first mobo "PC Chips M321"
Just now pulled out the BIOS and compared with M321. Has lot of differences.
