Interesting, never seen this.
I'am not promising something big but I got original CD with one of my Xabre so can watch to it (if I will find it)

readme from my CD, almost 300MB but 3DWizard folder only 2MB

Thanks! I also have the original CD but those drivers are not there... They were not very popular, and now they are nowhere to be found on the internet...

Let's just hope somebody has them on the hard drive and will share them here 😉

BTW. I like your page on Facebook 😁

Then you need find driver from 3D glasses card version ... this can be quite hard.

Thanks

This is on my CD from my Triplex Xabre Ultra

I am still looking for those drivers. They have to iclude the 3D Wizard version 1.6.

http://www.3dvelocity.com/reviews/SiS%20Xabre400/xabre3.htm

I need the following drivers to check if the egle-eye option is included there:
- 3.01.02
- 3.02.53

@ B.Gumble, What version do you have? I can see there is 3D Wizard, but you would have to check if there is Eagle-Eye option. It is not always there.

I used the 3.57.53 drivers - 3D Wizard is there but no Eagle-Eye option 🙁

So far no success...

I tired the following drivers:

3.02a.02 (3021) - no 3D Wizard

3.02.53 (3020) - no 3D Wizard

3.06.1.02 (3060) - no 3D Wizard

3.09.52 (3090) - 3D Wizard is there, no eagle eye

3.10 (3100) - 3D Wizard is there, no eagle eye

3.57.53 (3570) - 3D Wizard is there, no eagle eye

For your info - I'am just using Xabre 400 with driver 3.03 from my CD and 3D Wizard is without features.

Try set option 3dSeeThrough=1 instead default 3dSeeThrough=0 in setup.ini file in usual Xabre driver folder before driver install.

What will change with this? I made some tests, gaming and results surprised me. I waited lower power in 3D.

I think, its can help enable Eagle-Eye. if no - sorry 😀
i cant check it - i havent sis vc.

OK thanks, will watch for it.

I've just saw this thread, 3D Wizard is just a mere registry editor, nothing more than that. You don't need it, the functionality is present in the drivers, just try to set SeeThrough (should be SiS.3D.SeeThrough in registry?) to value higher than 0 in a similar fashion to setting TexTurbo in Xabre drivers. Should work for both, Direct3D and OpenGL.

Who got it, can you share?

it works!

download this
https://archive.org/details/sisvga-v-14.7z

first edit aplication\3dwizard\setup.ini

1 intall utility and driver
2 install 3D wizard