First post, by britain4
I’ve just built a Socket 7 system with USB ports and I was wanting to use Windows 95 with it.
I was wanting to use XUSBSUPP with it as it sounds like it works similarly to NUSB but for Win95 - however I cannot seem to get USB to work, the ports don’t function and the USB controller says there is a resource conflict in Device Manager whatever I set the IRQs to in there or the BIOS - same result.
I might try a fresh install Friday and see if I can get it to work downloading the drivers for the USB controller manually then installing XUSBSUPP.
Am I being a bit too ambitious wanting flash drive support in Win95 and should I just use Win98 (probably with 98lite) instead? I’ve never had issues like this with my 98SE systems! But it’s a 1997 build so I wanted to stick with 95 if possible.
- P-MMX 200MHZ, PCChips M598LMR, Voodoo
- P-MMX 233MHz, FIC PA2013, S3 ViRGE + Voodoo
- PII 400MHz, MSI MS6119, ATI Rage Pro Turbo + Voodoo2 SLI
- PIII 1400MHz, ECS P6IPAT, Voodoo5 5500
- Toshiba Libretto 110CT, 300MHz, 96MB RAM