First post, by bjwil1991
- Rank
- l33t
I have an old Aztech Sound Galaxy NX Pro that has Disney Sound Source, Covox Speech Thing, 2 CD ROM controllers (Matsushita and Panasonic separate), and, get ready for this: Genuine OPL3. I repaired the card numerous of times due to accidentally breaking the traces, and replaced the old, broken volume pot last year, and I decided to get it out of storage to clean it off since I had excess flux on the board. However, when I cleaned the volume pot since it was sticking, I turned the wheel and it's spinning freely when it hits the small spot that stops the volume wheel from spinning excessively.
When I get home from work, I'm going to spin the wheel again and see what happens. Another note, I don't see anything that broke and the volume pots were shipped from overseas and are not being sold here in the US. Would spraying too much contact cleaner cause the volume pot to slip past the notch that prevents the wheel from spinning around the full 360?
Discord: https://discord.gg/U5dJw7x
Systems from the Compaq Portable 1 to Ryzen 9 5950X
Twitch: https://twitch.tv/retropcuser