HI,

This is my first 486 build since.......well, 1995!

I decided to put together my "dream" 486 for retro gaming. I have a Tomato 4DPS with 133Mhz AMD processor coming from Russia. The problem I see with these motherboards is they are system pulls and it appears they never include the back plate adapters for the on board peripherals such as the COM ports, parallel ports etc....

I imagine the COM and parallel plugs are pretty standard and Ive found a few places to order the back plates from. However, this board has a PS/2 port and a game port.

I could easily build a plug and cable if I had the pinouts of the headers. I have found the manual for the 4DPS and it has pin outs for the PS/2 port but not the game port.

Any ideas on where to look?