VOGONS

Help with 486 cache jumper

Topic actions

First post, by th1r5bvn23

Posted on 
User metadata
Rank Newbie
Rank
Newbie

I got this no-name 486 PCI board without cache on board. Bought 1 32K chip for tag and 4 64K chips for cache as this may be the maximum configuration for this board and installed. I set external cache enabled and 7 bit tag in BIOS. The 256K cache was correctly recognized but it would hang up after summary screen. Seems that I need to set cache jumper however I can't find any information on the board and there's no manual. Award BIOS ID 2A4IBSL9

The attachment IMG_20190829_182102.jpg is no longer available
The attachment IMG_20190829_185247.jpg is no longer available
The attachment IMG_20190829_181418.jpg is no longer available
The attachment IMG_20190702_215555.jpg is no longer available

AMD K6-2+ 500, FIC VA-503+ (1MB cache), 128MB SDRAM PC100, Voodoo3 3000 AGP, Labway Yamaha YMF719 with SAM2695

Reply 2 of 4, by th1r5bvn23

Posted on 
User metadata
Rank Newbie
Rank
Newbie
CuPid wrote:

this is that one : https://www.yoycart.com/Product/40462958600/
but I can't find any doc.

Yes. Found this one on Taobao (Chinese) and in the description the seller did provide some jumper settings for multiplier and FSB, but no for cache.
FSB settings: JP15 close/JP16 open - 40MHz; JP15 close/JP16 close - 33MHz.
Seems the only two jumpers undocumented are JP12 and JP13... both are 3 pin and locate near cache.

AMD K6-2+ 500, FIC VA-503+ (1MB cache), 128MB SDRAM PC100, Voodoo3 3000 AGP, Labway Yamaha YMF719 with SAM2695

Reply 3 of 4, by konc

Posted on 
User metadata
Rank l33t
Rank
l33t

If I'm not mistaken there are only 9 possible combinations for those 2 jumpers, that's not too much to try if you don't find any documentation.
Also if this fails make sure to test those cache chips on an other board, I don't know where you bought them from but there are a lot of cases of faulty or fake cache chips on ebay.

Reply 4 of 4, by th1r5bvn23

Posted on 
User metadata
Rank Newbie
Rank
Newbie
konc wrote:

If I'm not mistaken there are only 9 possible combinations for those 2 jumpers, that's not too much to try if you don't find any documentation.
Also if this fails make sure to test those cache chips on an other board, I don't know where you bought them from but there are a lot of cases of faulty or fake cache chips on ebay.

I don't have another 486 board, but I indeed bought 3 sets of 256K L2 (32K x1 + 64K x4). Maybe try them soon.

AMD K6-2+ 500, FIC VA-503+ (1MB cache), 128MB SDRAM PC100, Voodoo3 3000 AGP, Labway Yamaha YMF719 with SAM2695

Go to top of page Go to top of page
Back to General Old Hardware
Close window
Close window