First post, by GabrielKnight123
I am looking for recomendations for a stereo switch box so I can run one of my three PC's at a time and one of the three MIDI modules at a time through my
stereo mixer, my stereo mixer is a Xenyx 802 with limited inputs (2x stereo, 2x mono) that I use to mix:
Dos PC with MT32 or SC55 MK2
Win 98 PC with SC55 MK1
XP PC just to speakers
I have a MIDI mountain of two SC55's (MK1 + MK2) and a modifyed MT32 with four out puts two are for stereo clean and two for stereo reverb that take up 2
stereo inputs on the Xenyx 802 (3/4 & 5/6), the switch box im looking for needs to be able to switch between my modified MT32 with its two stereo outputs
and the two SC55's with their single stereo outputs but the ones ive been looking at online are to switch between single stereo outputs with a dial but I
think I will need a type that has a push button on/off for each audio output as I can then turn on numbers 1 and 2 in my picture to use the MT32 and turn
on just 3 or 4 for the SC55's.
My three PC's will either need a separate switch box or if possible be able to use the switch box for the above if it has two selectors (one for MIDI modules
one for PC's) and the switch box doesnt need a volume option as I would just use the mixer for volume. I have a picture I made to make it clearer but my
picture is assuming two switch boxes, I am using two mono inputs for the sound cards left and right channel as I like to control them this way on the mixer
and I have run out of stereo inputs.
Thanks all, GK123.