VOGONS


First post, by perhenden

User metadata
Rank Member
Rank
Member

It's an 8-bit ISA I/O card, parallel and serial external connectors.
The chips are labeled "UMC UM82C11" [1] and "UMC UM82450" [2] (two of the latter).
The labels "STK" and "S/N 066095" are printed on the board.
No other labels could be found.

DSC-0708.jpg

[1] Printer related
[2] Serial interface?

Reply 1 of 6, by Robin4

User metadata
Rank l33t
Rank
l33t

On the back is one serial and a parallel poort *aka printer)

The header on the top have a side for a joystick outpot.. (just need finding an Joystick bracket)

~ At least it can do black and white~

Reply 2 of 6, by Grzyb

User metadata
Rank Oldbie
Rank
Oldbie
Robin4 wrote on 2020-09-01, 19:38:

The header on the top have a side for a joystick outpot.. (just need finding an Joystick bracket)

No, it's the second COM, needs a bracket with 25-pin connector.
There are two UARTs there, and two pairs of 1488+1489 buffers.

Nie tylko, jak widzicie, w tym trudność, że nie zdołacie wejść na moją górę, lecz i w tym, że ja do was cały zejść nie mogę, gdyż schodząc, gubię po drodze to, co miałem donieść.

Reply 3 of 6, by Robin4

User metadata
Rank l33t
Rank
l33t

A com jumper header is never this wide. Iam certain that a DB25 header is a joystick port is DB25. Serial is DB-9

COM_Header_200-pitch.jpg

But it also could be that it is a Second LPT port (thats also is DB25) LPT2

Last edited by Robin4 on 2020-09-01, 22:35. Edited 1 time in total.

~ At least it can do black and white~

Reply 4 of 6, by imi

User metadata
Rank l33t
Rank
l33t

uh, no there are plenty of old machines with DB25 serial ports.

though most of them still connected with 9pin cables to cards iirc.

Reply 5 of 6, by Grzyb

User metadata
Rank Oldbie
Rank
Oldbie

See eg. this - http://www.uncreativelabs.de/th99/i/A-B/50704.htm

There are two 82450 UARTs, two 1488 buffers, two 1489 buffers - so two COM ports.

Nie tylko, jak widzicie, w tym trudność, że nie zdołacie wejść na moją górę, lecz i w tym, że ja do was cały zejść nie mogę, gdyż schodząc, gubię po drodze to, co miałem donieść.

Reply 6 of 6, by perhenden

User metadata
Rank Member
Rank
Member

Thanks guys!