VOGONS

Search

Common searches

Sourcing a socket 2, 3 or 4 for 486. To replace the burned out socket on compaq deskpro XL 4/66.

Topic actions

First post, by pentiumspeed

Posted on 
User metadata
Rank l33t
Rank
l33t

I purchased a set of boards and power supply to make a Deskpro XL up and running. Problem is: the processor 486 card has a pin contact burnt out, white ZIF with lever.

Good so far but few things that is kept me to do so, I could not find bare socket or a junk 486 board to rob the socket from. I do not want to buy a good one just for the socket to fix this.

If have junk boards to give away, PM me on this?

Help? Cheers,

Great Northern aka Canada.

Reply 2 of 4, by debs3759

Posted on 
User metadata
Rank Oldbie
Rank
Oldbie

Socket 4 is Pentium 60/66

See my graphics card database at www.gpuzoo.com
Constantly being worked on. Feel free to message me with any corrections or details of cards you would like me to research and add.

Go to top of page Go to top of page
Back to General Old Hardware
Close window
Close window