ASUS PVI-486SP3: Need specific resistor value \ VOGONS

ASUS PVI-486SP3: Need specific resistor value

Posted on 2020-10-01, 23:10

BastlerMike Offline

Rank Member

Somebody can tell me the value of R61 please?
I suspect this is the reason why the board is dead 🙁

The attachment IMG_20201002_010517.jpg is no longer available

Posted on 2020-10-01, 23:25

Thermalwrong Offline

Rank Oldbie

This is a PVI-486SP3 v1.8, hope this helps 😀

The attachment IMG_0644 (Custom).jpeg is no longer available

Posted on 2020-10-01, 23:52

pentiumspeed Offline

Rank l33t

His torn off resistor, next to it is 220 ohm resistor, while yours are 100 Ohms resistors. Revisions do matter.

Cheers,

Great Northern aka Canada.

Posted on 2020-10-02, 00:48

BastlerMike Offline

Rank Member

My board is revision 1.2
I soldered a 200 ohm resistor and the board is now working

Posted on 2020-10-02, 13:08

quicknick Offline

Rank Oldbie

Note that 100 and 220 mean 10 and 22 ohm respectively. (220 ohm would be marked 221).

Posted on 2020-10-02, 20:42

pentiumspeed Offline

Rank l33t

Oops. Forgot that. Yeah 22 ohms or 10 ohms are pretty low resistance. Enjoy!

Cheers,

Great Northern aka Canada.