Schneider Euro PC II power supply \ VOGONS

Schneider Euro PC II power supply

Topic actions

First post, by kroutilm@seznam.cz

Posted on 2021-02-15, 10:01

kroutilm@seznam.cz Offline

Rank Newbie

Rank: Newbie
Posts: 6
Joined: 2021-01-28, 19:32

Hello,
I have recently purchased Schneider Euro PC II and was surprised that the power connector is different from Euro PC. As I don't have power supply for Euro PC II I need to build one. However, I can't find any information regarding the pinout. Is htere any picture or documentation available?

Reply 1 of 4, by konc

Posted on 2021-02-15, 10:56

konc Offline

Rank l33t

Rank: l33t
Posts: 2516
Joined: 2013-01-14, 15:09
Location: Greece

http://oldcomputer.info/pc/euroPC2/index.htm
19V might look weird but it's confirmed working, voltages are regulated inside.
What I don't know/remember is if this pinout is from the plug or the socket side, you can check for example the ground on the Schneider side and figure it out easily.

Reply 2 of 4, by kroutilm@seznam.cz

Posted on 2021-02-15, 11:36

kroutilm@seznam.cz Offline

Rank Newbie

Rank: Newbie
Posts: 6
Joined: 2021-01-28, 19:32

Is it AC or DC? Do you know how the connector is called? I need to order one.

Reply 3 of 4, by konc

Posted on 2021-02-15, 11:47

konc Offline

Rank l33t

Rank: l33t
Posts: 2516
Joined: 2013-01-14, 15:09
Location: Greece

DC, I don't know about the connector though

Reply 4 of 4, by kroutilm@seznam.cz

Posted on 2021-02-15, 11:53

kroutilm@seznam.cz Offline

Rank Newbie

Rank: Newbie
Posts: 6
Joined: 2021-01-28, 19:32

konc wrote on 2021-02-15, 11:47:

DC, I don't know about the connector though

It's called Mini-DIN, I just googled it.

Thanks a lot.

Go to top of page Go to top of page

Back to General Old Hardware