VOGONS

HP Socket 370 board - standard ATX connector?

Topic actions

First post, by Almoststew1990

Posted on 
User metadata
Rank Oldbie
Rank
Oldbie

I am trying to find an M-ATX Socket 370 board that is not limited to Celerons / PPGA / 66MHz FSB. These are pretty expensive on eBay but I have found an HP board that is a lot cheaper:

HP 203966-001 213855-101

The CPU in the board seems to be a 133MHz P3 but the only worry I have is the ATX connector. It looks standard but does anyone know if it is proprietary or a standard ATX?

Reply 2 of 4, by Almoststew1990

Posted on 
User metadata
Rank Oldbie
Rank
Oldbie

Thanks very much, it looks like it's a Standard ATX connection.

Reply 3 of 4, by dionb

Posted on 
User metadata
Rank l33t++
Rank
l33t++

Yes, can confirm. It's a Compaq board, not HP (pre-merger, but listed as HP now), and it's ATX. I have a Tualatin-ready one here. Very decent for OEM stuff, quite unlike what Compaq was doing just a year earler.

Reply 4 of 4, by Almoststew1990

Posted on 
User metadata
Rank Oldbie
Rank
Oldbie
dionb wrote on 2021-03-28, 12:18:

Yes, can confirm. It's a Compaq board, not HP (pre-merger, but listed as HP now), and it's ATX. I have a Tualatin-ready one here. Very decent for OEM stuff, quite unlike what Compaq was doing just a year earler.

That's reassuring, I'll be putting an 800 to 1000MHz CPU in there so nothing crazy.

Go to top of page Go to top of page
Back to General Old Hardware
Close window
Close window