Help needed with Voodoo 5 5500 (AGP version) \ VOGONS

Help needed with Voodoo 5 5500 (AGP version)

Topic actions

First post, by phantomtypist

Posted on 2021-04-27, 19:48

phantomtypist Offline

Rank Newbie

Rank: Newbie
Posts: 4
Joined: 2020-10-28, 03:20

EDIT: AGP version of the Voodoo 5 5500.

Can someone that has one take me some pictures of different parts of their board? I have some parts broken off and I need references as to what they were and orientation.

On the front side, to the immediate left of the RIGHT side fan, there is a space for capacitor C62. I need that one.

On the back side, upper left corner (back side of where Molex connector is), I have C500, C501 and C502 capacitors missing.

Pictures: https://imgur.com/a/jiz36ZP

Last edited by phantomtypist on 2021-04-27, 20:24. Edited 2 times in total.

Reply 1 of 5, by akula65

Posted on 2021-04-27, 20:01

akula65 Offline

Rank Oldbie

Rank: Oldbie
Posts: 876
Joined: 2004-09-28, 01:29
Location: Virginia

Remember that there are both AGP and PCI variants of the card. It would be a good idea to indicate which is of interest in the title, so you don't get replies from folks with the wrong one. Looks like there is just enough evidence in the photos to indicate that this is the AGP variant.

Reply 2 of 5, by phantomtypist

Posted on 2021-04-27, 20:05

phantomtypist Offline

Rank Newbie

Rank: Newbie
Posts: 4
Joined: 2020-10-28, 03:20

AGP version.

Reply 3 of 5, by akula65

Posted on 2021-04-27, 20:35

akula65 Offline

Rank Oldbie

Rank: Oldbie
Posts: 876
Joined: 2004-09-28, 01:29
Location: Virginia

No markings on C500-C502.

21042700.jpg

21042701.jpg

Reply 4 of 5, by akula65

Posted on 2021-04-27, 20:44

akula65 Offline

Rank Oldbie

Rank: Oldbie
Posts: 876
Joined: 2004-09-28, 01:29
Location: Virginia

This may be useful: http://falconfly.vogonswiki.com/cgi-bin/yabb2 … um=1347523913/0

Reply 5 of 5, by phantomtypist

Posted on 2021-04-27, 21:36

phantomtypist Offline

Rank Newbie

Rank: Newbie
Posts: 4
Joined: 2020-10-28, 03:20

NICE!!! 🤣, C502 says "unchecked". Does anyone know Hank Semenec? I heard he has all of the original schematics from 3dfx.

Go to top of page Go to top of page

Back to General Old Hardware