VOGONS


First post, by metrox

User metadata
Rank Newbie
Rank
Newbie

So I'm trying to get USB support on this old ATC-6130 Motherboard with an Intel Intel 440LX chipset but I get a black screen and am not able to boot at all when I insert the PCI USB card.
What I have tried so far.

1. Switch PCI slots
2. Remove other cards

This is the StarTech.com 7 Port PCI USB Card Adapter.
https://www.officedepot.com/a/products/106089 … cB&gclsrc=aw.ds

And this is the mother board with the problem.
https://stason.org/TULARC/pc/motherboards/A/A … I-ATC-6130.html

Reply 1 of 4, by darry

User metadata
Rank l33t++
Rank
l33t++
metrox wrote on 2021-06-18, 04:25:
So I'm trying to get USB support on this old ATC-6130 Motherboard with an Intel Intel 440LX chipset but I get a black screen an […]
Show full quote

So I'm trying to get USB support on this old ATC-6130 Motherboard with an Intel Intel 440LX chipset but I get a black screen and am not able to boot at all when I insert the PCI USB card.
What I have tried so far.

1. Switch PCI slots
2. Remove other cards

This is the StarTech.com 7 Port PCI USB Card Adapter.
https://www.officedepot.com/a/products/106089 … cB&gclsrc=aw.ds

And this is the mother board with the problem.
https://stason.org/TULARC/pc/motherboards/A/A … I-ATC-6130.html

Probably not the news you were hoping for, but have a look at this post Re: Active adapter to use USB keyboard on motherboard with only ps/2

The short of it is that you should probably try a USB 2.0 card based on a NEC controller chip instead .

Reply 2 of 4, by Doornkaat

User metadata
Rank l33t
Rank
l33t

According to the reviews on the site you bought it from others have the same problem.
I'd say the card is the issue here.

Reply 3 of 4, by metrox

User metadata
Rank Newbie
Rank
Newbie
darry wrote on 2021-06-18, 04:50:
metrox wrote on 2021-06-18, 04:25:
So I'm trying to get USB support on this old ATC-6130 Motherboard with an Intel Intel 440LX chipset but I get a black screen an […]
Show full quote

So I'm trying to get USB support on this old ATC-6130 Motherboard with an Intel Intel 440LX chipset but I get a black screen and am not able to boot at all when I insert the PCI USB card.
What I have tried so far.

1. Switch PCI slots
2. Remove other cards

This is the StarTech.com 7 Port PCI USB Card Adapter.
https://www.officedepot.com/a/products/106089 … cB&gclsrc=aw.ds

And this is the mother board with the problem.
https://stason.org/TULARC/pc/motherboards/A/A … I-ATC-6130.html

Probably not the news you were hoping for, but have a look at this post Re: Active adapter to use USB keyboard on motherboard with only ps/2

The short of it is that you should probably try a USB 2.0 card based on a NEC controller chip instead .

I found this NEC USB card on ebay, https://www.ebay.ca/itm/164755183901?hash=ite … EMAAOSwRZpgSkuf
Wonder if that one would be more compatible.

Reply 4 of 4, by metrox

User metadata
Rank Newbie
Rank
Newbie

Actually this motherboard has a USB connector built right in I just need to be able to find this type of cable for a USB backplate.
wcXWxhZ.jpg