Reply 20 of 46, by Jasin Natael
- Rank
- Oldbie
speeddemon wrote on 2021-07-31, 03:12:Thanks! […]
Jasin Natael wrote on 2021-07-29, 18:32:Nice build! […]
Nice build!
I recently built something similar albiet with a crappy PC Chips M571 board, but also a K6-3+ @6x83=500mhz and a PCI Voodoo 3.
I had a heck of time getting mine stable but mainly due to my board not really allowing for low enough voltage for the chip, and weirdness with IDE controllers on the board.
But in the in end it is running and pretty stable.
I'd be curious to see some benchmarks if you have the time. I always start with Phil's DOS benchmark suite.
https://www.philscomputerlab.com/dos-benchmark-pack.html
It would be cool to compare how your admittedly more quality mainstream board compares to my cheap and nastyl PC chips solution.
Thanks!
Here you go:
- Chris’s 3D Benchmark = 533.3
- Chris’s 3D Benchmark 640x480 = 114.8
- PC Player Benchmark = 151.9
- PC Player Benchmark 640x480 = 37.9
- Doom (Max) = 123.7
- Quake = 89.6
- Quake 640x480 = i'm curious now what your results are now 😀
Here you got, thanks again for running those I included a few Windows benchmarks as well
A few benchmarks are @ 83x6=500mhz
Superscape 1.0 Low Res: Comes back 0.0 but runs super fast?
Superscape 1.0 High Res: 587.5
Chris' 3D Bench Low Res: 627.6 (376.5FPS)
Chris' 3D Bench High Res: 116 (69.6FPS)
PC Player Bench Low Res: 162.3FPS
PC Player Bench High Res: 41.2FPS
DOOM Minimum: 2134 in 140 realtics
DOOM Maximum: 2134 in 510 realtics
Quake Low Res: 88.5
Quake Medium Res: 38.0
Quake High Res: 22.2FPS
Topbench: 519
Speedsys CPU: 564.46
Speedsys Memory Bandwidth - 186.69 MB/s
Speedsys Throughput - 122.57MB/s
Windows benchmarks:
3DMark 99 Max Default Run 800x600 16bit:
2750 3D Marks
6501 CPU 3D Marks
3DMark 2000: Default Run 1024x768 16bit:
1509 3DMarks ( I might do a 800x600 run later who knows)
Unreal avg about 44fps @ 800x600