Still a work in progress....

VINTAGE DESKTOPS

1985 Tandy 1000 A
PSU: Proprietary
MoBo: Tandy 1000A Motherboard
CPU: intel 8088 4.77MHz
RAM: 640K
FDD: 2x 360K DSDD
HDD: 3GB Seagate on XT-IDE Controller (1st version)
GFX: TGA
SND: Tandy 3-voice
NET: RTL 8019
OS: MS-DOS 6.22/Deskmate II

GEM Computer Products 286
PSU: 200 Watt Magitronic Full AT
Case: SunCheer/SongSheer? Full AT IBM AT Clone chassis
MoBo: Octek REV 5.1
CPU: Intel 80286 10MHz, running at 12MHz (yep, overclocked via DIP Switches/BIOS Glitch with CoPro)
CoPro: IIT 802c87 12MHz
FDD: 1.44MB Epson, 1.2MB TEAC
HDD: 3GB CDC SCSI
ODD: NEC 4X SCSI CD-ROM
GFX: TSENG ET4000 1MB SVGA ISA
SND: Soundblaster 16 Value ISA
NET: LinkSys Etherfast PnP ISA
O/S: MS-DOS 6.22, toying with installing FreeDOS on it though

486 DX4 Desktop
PSU: J.D.R. MicroDevices 200 Watt XT
Case: SongCheer/SunCheer XT Clone Chassis
MoBo: FIC 486 PVT Socket 3 VLB
CPU: AMD Am486 DX4-100 SV8 (write back enabled)
L2 : 512K
RAM64MB FP 72 pin 60ns
FDD: Mitsumi 3.5" 1.44M, Mitsubishi 5.25" 1.2M
HDD: Lian Li RH17 Mobile Rack w/ Key disabled, x5 Caddies, on PTI-255W Super I/O VLB Controller
OPT: 48x DVD-RW PATA Drive
GFX: S3 805 2MB VESA Graphics Card
SND: SoundBlaster AWE64 Platinum
NET: LinkSys EtherFast Pnp ISA
O/S: See Caddies Below
Caddy #1: 8GB Seagate Barracuda, Maxblast DDO, MS-DOS 6.22/Windows For Workgroups 3.11
Caddy #2: 80GB WD800, OnTrak DDO w/ CD-ROM Support, Windows 95 OSR2
Caddy #3: 80GB Seagate, Seagate DDO W/ CD-ROM Support, FreeDOS 1.2
Caddy #4: SATA converter....pending
Caddy #5: 2.5" to 3.5" converter...pending

NEC Ready 9522
PSU: Baby AT PSU, Packard Bell Style
CASE: LPX Tower, NEC "LX"
MoBo: Looks to be similar to some Packard Bell and Zenith Boards I 've seen
CPU: intel Pentium 100MHz
Cache: 256K COAST
RAM: 128MB
FDD: 1.44MB 3.5" NEC
HDD: 80GB Seagate w/ Seagate DDO
CD-ROM: 2x NEC CD-ROM
GFX: Alliance 1MB SVGA
SND: Crystal CS-4237 Digital Audio w/ OPL
NET: Intel EtherExpress PCI 10/100
O/S: Microsoft Windows 98 Second Edition

Dell Dimension 3000
PSU: Generic ATX
CASE: Dell mATX chassis
MoBo: intel Board, P4, no SATA
CPU: intel Pentium 4 2.6GHz
RAM: 3GB
HDD: 128GB mSATA in 44pin converter
OPT: DVD-RW Drive, PATA, unknown speed, stock
GFX: intel On-board
SND: SoundMax integrated Audio
NET: Built-In Intel On-Board
O/S: Microsoft Windows XP Professional x86 SP3

VINTAGE LAPTOPS

NEC Versa 40EC
CPU: Intel 486 SL DX2 40MHz
RAM: 20MB
FDD: 1.44MB VersaBay
HDD: 80GB Fujitsu
GFX: WDC 90C024 1MB SVGA, NEC NL6448AC30-06 9.4" LCD 640x480 TFT Active Matrix w/ Rev 10 CFL power
SND: internal speaker
NET: Docking Station + Lucent Orinoco WaveLAN Silver 802.11b WiFi 11mbps
O/S: MS-DOS 7.0 + Windows For Workgroups 3.11

NEC Versa V/50 - Currently Broken, Motherboard fried from accident with bad HDD
CPU: i486 DX2 SL 50MHz
RAM: 20MB
FDD: 1.44M NEC VersaBay
HDD: 80GB Seagate
GFX: WDC 90C024 1MB SVGA, NEC NL6448AC30-10 9.4" LCD 640x480 Active Matrix
SND: internal Speaker
NET: Docking STation + one of the WiFi Cards
O/S: FreeDOS 1.2

NEC Versa M/75HCP - rebuilding the Touch Screen...that's all that's left
CPU: intel 486 DX4-75
RAM: 40MB
FDD: 1.44M NEC VersaBay
HDD: 2x swappable - both 80GB Seagates - one for Microsoft, one for FreeDOS
GFX: C&T 65545 1MB SVGA w/ NEC NL8060AC24-01 9.4" LCD Panel 800x600 Active Matrix & soon Generic 3M compatible Touch panel
SND: Crystal CS-4231-KQ WSS Compatible Digital Audio, no OPL
NET: Docking Station + Cisco Aironet LMC-352 802.11b WiFi 11mbps
O/S: Disk #1: MS-DOS 7.01/Windows 95 OSR 2.5/Windows For Workgroups 3.11, Disk #2: FreeDOS 1.2 (with about every WSS capable game I could find)

NEC Versa P/75HC
CPU: intel Pentium 75MHz
RAM: 40MB
FDD: 1.44MB 3.5" VersaBay
HDD: 80GB HDD
GFX: C&T 65546 1MB SVGA w/ NEC NL8060AC24-01 9.4" LCD Panel 800x600 Active Matrix TFT
SND: ESS 688 AudioDrive
NET: Docking Station+ Cisco Aironet LMC352 WiFi 802.11b 11mbps
O/S: FreeDOS 2.1

AT&T DS Docking Station (rebranded Versa Dock II)
ISA Cards: SMC Ether EZ 8416 10mbps LAN ISA
CD-ROM48X ATA CD-RW Drive

PLANS

- Flip the Ready and the Dell most likely. But Need to figure out a good way to do that.
- Repair the V/50
- Fix screen board on 40EC (this weekend)
- Figure out the Pinout on my Panasonic Sound/SCSI Adapter (building a custom internal speaker board for it eventually)
- V20, 8087, and design and build custom gamepads for the Tandy 1000A
- instlal FreeDOS on the 286 - likely 1.3 RC4 or higher
- Build out the other two caddies for the 486, thinking of youtubing Firefox in Win2K on it