First post, by nuno14272
Hello fellows,
I have this babyAT board (DFI P5BV3+) with a K6-III 400mhz and i was trying to do some overclocking. At least put the cpu at 500mhz wich is my goal.
I know is not a "recent" board but i've read some good reaviews about this board. (Have other like the FIC PA2013)
I think the K6-III have unlocked multiplier right.
So, i set the board jumpers to 100fsb x 4multi and everything is fine
them i set 100fsb x 4.5 multi and i get a K6-III 450mhz - great.
then i rise the voltage to 2.5v (original is a 2,4cpu) and set to 100fsb X 5 multi and the computor does not boot.
I mean.. i see all this people getting 500mhz/550mhz, even 600mhz easy and it seams i cant get past de 4,5 multiplier...on this board.
strange..
1| 386DX40
2| P200mmx, Voodoo 1
3| PIII-450, Voodoo 3 3000