Good evening everyone, my voodoo 4 4500 position c76 is missing a ceramic capacitor but I don't know the value, could anyone tell me?
It seems that they solder in parallel, so it must be the same value as the other cap.
A-Trend ATC-1020 V1.1 ❇ Cyrix 6x86 150+ @ 120MHz ❇ 32MiB EDO RAM (8MiBx4) ❇ A-Trend S3 Trio64V2 2MiB
Aztech Pro16 II-3D PnP ❇ 8.4GiB Quantum Fireball ❇ Win95 OSR2 Plus!
Good morning, when searching on the internet I found a photo, however, it doesn't look the same as the capacitor next to it, it seems to be bigger
then same as C72, still its not required for operation of the card as its one of many on that power rail
https://github.com/raszpl/sigrok-disk FM/MFM/RLL decoder
https://github.com/raszpl/FIC-486-GAC-2-Cache-Module (AT&T Globalyst)
https://github.com/raszpl/386RC-16 ram board
https://github.com/raszpl/440BX Reference Design adapted to Kicad
Good afternoon, I put a cap of the same value as the C72 and it worked perfectly. thank you very much
