Yesterday on the settings of irq 7 dma 1 hdma 5 the diagnostic tool worked without a problem (except for a crackle on 16 bits) Today, after changing irq to 7, 10, dma to 1.3, hdma 5, 6, 7 which did not solve the problem with the crackling of 16 bit samples, the diagnostic tool hangs even with the …

Hi, I just assembled my retro kit consisting of the PC Chips M321 board with 386 DX40 processor and the SoundBlaster CT3600. After searching for the best driver for this card, I did everything as recommended, but during diagnostics I have a strange audio dropout when testing 16 bit samples. 8 bit is …

Hi, I would like to make a connection from the motherboard to the PC speaker input of my sound card, but I am thinking about a matter. Socket on the motherboard has 4 pins: 1 -sp -speaker 2 GND Ground 3 GND Ground 4 + SP5V + Speaker +5 VDC (PC Speaker uses only 2 pins - 1 and 4) and the slot on my …

These are the differences I notice. Visible tinkering only with ladders and port ide. The rest looks factory. Why in this case there are sockets like aux1 and aux2 on my card and there are no such sockets in another ct3600, in the same way I have a jumper next to memory banks and on other ct3600 …

Hi, today I looked at my SB and comparing it with CT3600 pictures on the internet, it turns out that several elements are missing. Missing resistor ladder at PR1 PR2 and IDE interface. PR1 and PR2 are 9 pins. Can you tell me what resistors are missing and why the card works properly without them? :) …

Unfortunately, the purchased adapter does not display 720x400 @ 70Hz 🙁 although the manual says otherwise.

Prez wrote on 2020-06-06, 09:55: Hi all, […] Show full quote Hi all, I ordered this one, its cheap : https://www.aliexpress.com/item/4000330193506 … .3e9c3f7behMnTV Will show my tests 😉 Best regards Philippe Dubois Can't wait for Your test.

Hi, I have a vga to hdmi adapter, but unfortunately I don't have a screen image when connecting an old computer with a dosa (HP t5710 thin client). Does anyone have experience with such adapters that will support dos games, programs. I know that Norton Commander on DOS uses 720x400 @ 70Hz resolution …

I'll note at the beginning that I was looking for a theme for my query but could not find a specific answer - is any way to lunch real cdrom drive under dosbox (win95)? The final section of my dosbox.conf is as follows: [ide, primary] # enable: Enable IDE interface enable=false [ide, secondary] # …

YES! it works! BIG THX! 😀

HI all! I have a problem with right detection of cdrom speed in game "Fade to Black" When I running the game on the screen appears (cdrom in mode "ioctl_dio"): http://img442.imageshack.us/img442/306/523234d.jpg When I change the cdrom lowlevel support option to "noioctl" http://img32.imageshack.us/ …

i've ati 5770 - but i dodn't want to reinstall my ati driver - at the moment i use catalyst 11.3, and i dont know that catalys 9.5 detect my video card... yesterday i download catalys 9.5, i started install bud when ati decompres files i quit installation, i have found ATIUMDAG.DL_ and with command …

thx but i found this website when i was searching about Interstate ’76 problem with hardware acceleration. Game from GOG - Interstate ’76 Arsenal is the goood, old game I76 but already patched to running the game under Xp/Vista or 7. Anyway thx for intention...

I used Glide2x.dll version from nglide (~1,2mb - in win7 x64 copy from c:\windir\syswow64\) and efect the same - "Failed o Initialize...". Also i try this (from gog forum) "Problem: The game crashes with an error 'Failed to Initialize 3D hardware acceleration'. Possible workarounds: Some speculation …

Hi I have a problem with Interstate ’76 Arsenal running on my win7 x64 The problem is - when started game with glide options, the game show me message "Failed to Initialize 3D hardware acceleration'. I've read that problem is on my ati driver: "ATIUMDAG.DLL from Catalyst 9.5. Seems to work well so …

hi, i have a question about pixelshader and scaler - when i must pust shaders and how can i turn on pixelshader function? a'm the new one 😀 so please help me. THX!

thx for help, another version works great!

Hi, this is one of my favorites games - terminal velocity, but under dosbox 0.74 when i run the game i have a message: "ERROR: Virge not on board. Press any key to return to caller..." i know that is problem with vga card - is any virge graphic emulator? thx