the board is finally here, two notable chips: one pretty fast (40MHz) 68 pin TMS320C25FNL, and one Bios looking PCM54HPJ 28 pin... 4 RCA jacks, labeled IN1,IN2,OUT,SPKR. Full size ISA card. Any clues? Any software to discover the card? thanks!

Yeah, I'm afraid that too, maybe I sell her here in Brazil, as "piece of history"...

The computer that card shipped in has some mention in an old late 1980s issue of Network World Magazine. They advertised said computer as being notable for having the ability to answer a phone. http://books.google.com/books?id=JxMEAAAAMBAJ&pg=PA19&lpg=PA19&dq=AT%26T+6386+/25+WGS&source=bl&ots= …

Thanks to everyone, when the card is here I will tell the details. See ya!

Hello to everyone, I was doing my daily search on ebay for cool stuff, and then this apperead to me: http://www.ebay.com/itm/390097661414?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_500wt_970 I asked the seller about more info, and he sent me an email: me: Hello, this card uses a ISA bus? …

Small world... hello Lucas! I am really eager to see the CT1330A you sent me :happy: I meant one is better to make sure these days that the goods are not radioactive (airports are checked but other shipment methods are not always safe). I know that Japanese traders are very honorable, no doubt. …

Buying from Japan is very good, I bought a CM-64 and a BOXED like new Roland CM-500 with two MPUs (PC98 and ISA Super MPU II) from Japan, all working perfect.

Thanks! I will try to find the correct mini-DIN. See ya.

Hello people. I'm having some trouble to decide what cable to buy, I have a SCC-1 and mine CM-64 is almost here (customs delay), and I'm wanting to buy the cables at once. SCC-1 have a 5 pin mini din(that is very different from pc keyboard mini din), the manual says that I must use a adapter cable …

Hello again, can anyone try to turn on a GUS with no memory chips? I'm thinking in a bad RAM case. Thanks!

Test in another 2 motherboards (A ATX P3c-2000 and a 486 MB) results: same old history, still hangs in ultrinit/setup.exe. The P3C-2000 Bios have some options about the ISA slot, 16bit bus clock and 8 bit bus clock (tried change, but no result), they are set by default in 3.5CLK. I'm thinking in …

Tried Windows 98, it's possible to install the card, but Windows says the card could not be initialized. I had a chat with the seller, He says the card was fine, no problem at all. Also said that I did not tested it on a 386, because the card could not fail in a striped system. Well, I'm testing it …

two chips, only one is socket type, I removed it and tried, but the same result. should I unsolder the other chip, and get a chip from a pci vga? are you from Brasil?

My Com ports and LPT ports are all disabled, no luck... Any more to do? Does anyone know if a bad RAM on the card could do that? Thanks!

Just removed all of the removeable chips, cleaned the contacts, but still no luck. I will try on different boards. I will keep posting what happens. Thanks!

I have some news,cleaning the contacts did not help. On the setup.exe the card pass ok by the codec test (32c), in every test her fails, but failing on the memory test was very curious to me, are necessary any irq to acess the card's memory? I will remove the extra mem chip, and test. always thanks …

I did not cleaned the card, I will try. But Ultrainit.exe freezes my computer... With various settings. Will be a shame if I clean those shinning contacts and the card works... But a very happy shame xD Thanks for the reply.

Hello, before any questions, I would like to thank all people from Vogons, I always read the posts, and now I made a login to me. Thank you! Now, the part where I need help: 1)First, sorry about the bad english. 2)I've got a Gravis Ultrasound MAX Rev 1.8 1MB, and the card simply do not work, let me …