Re: IBM PS/1 2133 hangs when using SFX
Posted on 2021-05-27, 08:32
Before I forget. Switched Hi/Lo DMA channels to 3. So now everything works well.
Re: CDROM on Compaq Presario CDS 520
Posted on 2015-08-28, 19:48
Try to use teac_cdi.sys with key /S:4. Link: http://www.rm.com/_RMVirtual/Media/Downloads/teac24x.zip Example: DEVICE=C:\DRIVERS\teac_cdi.sys /D:MSCD001 /S:4
Re: IBM PS/1 2133 hangs when using SFX
Posted on 2014-12-06, 15:26
CT1600 has been replaced with CT2770. Since then no more hangs in Wolf3D. But some of the sound effects gone like doors, shots and guards' shouting.
IBM PS/1 2133 hangs when using SFX
Posted on 2014-11-24, 16:47
Hello there! So the thing is in the topic and here're some details. Sound card is CT1600 and it's connected via riser. I've tried two games on it, Wolf3D and Doom v1.9 and both of them freeze with SFX turned on (run well if using sound card just for music or not using at all). Sound Blaster has been …
Re: Think my AWE32 is dead :-(
Posted on 2014-09-09, 18:44
Examined pictures you gave and here are some notes: Hope this helps.
Re: 486 four-eighty-six or four-eight-six?
Posted on 2014-07-19, 11:32
In Russia we say: chet`iresta v`osem'desjat shest`oj 😀 Which means: four hundred eighty sixth.
Re: Top game pics for 286 era
Posted on 2014-02-19, 11:19
I have the same system and if I compare it to a 386DX-40, Wolf3d runs like crap on a 286. It's all relative, you know. Some 80386 and their clones are running much worse than 80286-20 Harris. Still, for me it was playable. OP said they weren't interested in a "hotrod" 20MHz 286. ;) Er... my bad, …
Re: Top game pics for 286 era
Posted on 2014-02-19, 06:40
Gods by Bitmap Brothers; Prehistoric 2; Wolfenstein 3D, which runs smooth enough on Harris 20MHz + 1Mb RAM + Trident 9000c ISA.
Re: POLL: What is your favorite vintage processor?
Posted on 2014-02-18, 10:06
Definitely, it's am386-40.
Re: SS7 DFI VIA P5BV3+ mobo, basic info.
Posted on 2013-12-13, 19:41
That's an option I guess, though it's strange a bit for SS7 mobo. What the heck, I'll set one up when I get how to stick it on 10x10mm square.
Re: SS7 DFI VIA P5BV3+ mobo, basic info.
Posted on 2013-12-13, 14:29
Five minutes or so. Thanks!
Re: SS7 DFI VIA P5BV3+ mobo, basic info.
Posted on 2013-12-13, 13:59
I've got the mobo and have one question about CEB6030L heating. Is it normal to heat up to ~65-70 degrees Celsius? Not so chilled, right? Can anybody who has this mobo check the MOSFET temperature?
Re: ISA controller cards - Winbond not working
Posted on 2013-12-03, 13:59
Hey, I've got some jumper settings for Prime 2C. Hope this helps.
Re: Chaintech 4SLD motherboard factory hard wired 5v.
Posted on 2013-09-22, 15:52
It seems to be ok but anyway check theirs datasheets.
Re: Q: EDO vs. FPM - how to tell which is which
Posted on 2013-09-21, 20:25
IMO, there's only one way - read datasheets.
Re: Chaintech 4SLD motherboard factory hard wired 5v.
Posted on 2013-09-21, 20:14
I have the same motherboard but with voltage regulator installed. It's Sharp PQ30RV21.
Re: Roland SC-55 + YMF719 = Hanging Note Bug
Posted on 2013-06-20, 08:07
Both tracks seem to be the same but there's no hanging note in 8th level.
Re: Roland SC-55 + YMF719 = Hanging Note Bug
Posted on 2013-06-18, 15:49
allright, off to test! edit1: it happens with sb16+db50xg , dsp is v4.13 edit2: it doesn't happen with a real MPU401-AT + CM32-L , either in LA mode or "GM" one... will test more with a SC-55 and a MU80 once I receive them... but it will be a while edit3: I don't get the hexen hanging note bug with …
Re: Roland SC-55 + YMF719 = Hanging Note Bug
Posted on 2013-06-18, 14:29
keropi wrote: ^ can you make a savegame before the bug? Wanna test it with both a sb16+db50gx and mpu401at+cm32l You can type "idclev22" in game and this will allow you to jump into 22nd level. Bug appears after 5' or so.
Re: Roland SC-55 + YMF719 = Hanging Note Bug
Posted on 2013-06-18, 14:12
Do you find that the problem is reproducible? Under exactly the same conditions? Did you play levels 1-21 in the sitting, ending up with a hanging note in level 22? I suppose yes, it is reproducible. Not exactly. From 1st to 7th level I played with AWE32 + NEC XR385, then I bought Roland and …
Page 1 of 4