hmmm, GTX660 only successfully worked with: HT - 1x\2x , AMD K8 C'n'Q - Enabled, Overclock Profile - Auto or HT - 1x\2x\3x , AMD K8 C'n'Q - Disabled, Overclock Profile - Manual, PCI E Clock - 100MHz, PCI Clock - 33.33MHz, with HT 4x\5x\Auto - black sceen. GTX580 works only in the safe mode and not …

somebody tested new VGA card PCI-E v3.0 on Asus A8N Sli PCI-E v1.1? I tried video cards GTX660 (+6-pin power PCI-E) and GTX750Ti (without auxiliary power), but they haven't earned - the black screen after loading =( it may be necessary to connect the 4-pin MOLEX connector on the motherboard?

ASUS A8N Sli 4x2GB Kingston KTS7602\4G (2x2 kit) PC2100R ECC Registered 266MHz CL2.5 2.5V (K4H510438 D -ZC CC ) 5th Gen. chip CC : DDR400 (200MHz @ CL=3, tRCD=3, tRP=3) Memory timings work CL3 (3-3-3-8), CR1 (T1), 2.6V and on speed 400MHz. analog Samsung M312L5720CZ3-CCC 2GB PC3200R CL3 ECC ( …

I have found in what a problem , you were right - CPU Stepping D0 =( , my CPU stepping E6 and it's working. The first thing you listed isn't relevant because of your cpu. Because you have a cpu with E0 or higher (yours should be E4 or E6), you would want to Enable the Hardware remapping if your …

Hmm, the options "H/W remapping" are present initially in BIOS v1604. Perhaps depends on the stepping of the CPU? Cool'n'Quiet works for me steadily only at the option "Overclock Profile" - "AUTO", if to select "MANUAL" - the system falls in BSOD =\ . C'n'Q works at Windows 7 initially and also to …

I installed 64-bit OS and memory works correctly. Memory timings work CL3 (3-3-3-8), CR1 (T1) and on speed 400MHz. PS. options "memory hole" = S/W & H/W DRAM Over 4G Remapping in A8N-SLI v1604 BIOS

PS. I was wrong, i read this topic for work trim the SSD-disk does not need RAID 0 mode and the modified driver, just use standard IDE mode and standard driver MS. SSD-disk must be connected to the port SATA3\4 (SATA rev. 2.0 (3 Gbit/s, 300 MB/s)) and to use MS IDE-driver (ATA Device), when the …

[Guide] Award/Phoenix BIOS Modding I use 1604 Latest beta BIOS from ASUS site and only add Especially modified NVIDIA RAID ROM v10.0.0.35 for NF4 AMD systems for use SSD in RAID0 + Optimized nForce Driverpacks for Vista/Win7-10

Hi all! I did install memory 2x2GB Kingston KTS7602/4G (2x2 kit) ECC Reg. on my old system just now and it's working successful: Asus A8N-SLi BIOS v1604 moded (add NV RAID ROM 10.0.0.35) AMD Athlon 64 3200+ (Venice, E6) 40GB SSD Intel X25-V Value (setup in RAID0, driver v10.3.0.42) Legacy Driver …