Re: Falcosoft Soundfont Midi Player + Munt VSTi + BassMidi VSTi
Posted on 2019-03-28, 03:09
EmperorGrieferus wrote: Well, I'm very sorry for wasting your time in vain. Already happened before 😀
Re: Falcosoft Soundfont Midi Player + Munt VSTi + BassMidi VSTi
Posted on 2019-03-28, 02:50
I understood. But the problem is in gain: less gain - more noise. More gain - less noise. This is why Simple Gain VST requires 24 dB as gain range max value. NO, you do not understand. The problem is you used 16-bit recordings, thus decreasing the dynamic range and then you tried manipulating the …
Re: Falcosoft Soundfont Midi Player + Munt VSTi + BassMidi VSTi
Posted on 2019-03-28, 02:39
Please read again. I have just tried and in case of 32-bit floating point recordings I get the exact same noise level If I record with Simple Gain Vst +12dB option or with 0 dB option and amplify +12 dB in Audacity afterwards.
Re: Falcosoft Soundfont Midi Player + Munt VSTi + BassMidi VSTi
Posted on 2019-03-28, 02:31
OK, now I think I understand what your problem is. When you use simple gain VST it works with 32-bit floating point data since in VST world everything is floating point. But your recordings are all 16-bit integer ones. So they have smaller dynamic range and when you normalize them or add 12 dB gain …
Re: Falcosoft Soundfont Midi Player + Munt VSTi + BassMidi VSTi
Posted on 2019-03-28, 01:56
SCVA Pan: L63 SCVA Level 127 SGVST Gain: 0 dB. SGVST Balance: R10. Second sample used parametres: SCVA Pan: L63 SCVA Level 127 SGVST Gain: +12 dB. SGVST Balance: R10. Image2.jpg You wrote that the 1st sample was recorded at 0 dB and the 2nd at +12 dB. Yet both samples in your recording have the …
Re: Falcosoft Soundfont Midi Player + Munt VSTi + BassMidi VSTi
Posted on 2019-03-28, 01:30
4. 44100 Hz. My favorite. I checked 32000 and 48000. Both are awkward. First have squeak, second, in my opinion, is too soapy. Taste is one thing but facts are another. You can have 44100 Hz as 'favorite' but in this case it's simply the worst choice. I'm not talking about your final end result …
Re: Falcosoft Soundfont Midi Player + Munt VSTi + BassMidi VSTi
Posted on 2019-03-28, 01:08
Please be a little bit more specific. Instead of writing down what you did NOT do you could describe the exact steps you had done. And also some details about: 1. What software you used for recording? 2. What exactly you recorded from SC-VA itself? 3. How simple gain VST is a part of your process? …
Re: Falcosoft Soundfont Midi Player + Munt VSTi + BassMidi VSTi
Posted on 2019-03-28, 00:44
3. Yes. Because then I will get sample with distortion Then you must be doing something wrong in Audacity since the original 0 dB gain recording amplified by Audacity by +12dB should give the same result as recording with Simple Gain VSTi by +12dB. Also you should only hear distortion/clipping when …
Re: Falcosoft Soundfont Midi Player + Munt VSTi + BassMidi VSTi
Posted on 2019-03-27, 23:59
Answer my previous 3 questions before expecting further help
Re: Falcosoft Soundfont Midi Player + Munt VSTi + BassMidi VSTi
Posted on 2019-03-27, 23:33
This whole conversation started to be completely nonsensical. Let's start it again. Please, answer these simple questions: 1. What happens when you listen to SC-VA real time without any gain effect? Do you hear any noise you mentioned? (It's important since you mentioned the problem is not with the …
Re: Falcosoft Soundfont Midi Player + Munt VSTi + BassMidi VSTi
Posted on 2019-03-27, 22:57
Once again: If the noise is not there when you increase the gain in Audacity by either +12 or +24 dB (you only hear noise in the original quiet recording) then the problem is your audio hardware/driver. There is no other explanation. And then the noise is really not "there" even in the original …
Re: Falcosoft Soundfont Midi Player + Munt VSTi + BassMidi VSTi
Posted on 2019-03-27, 22:39
I see. If you add 12 dB gain to the upper sample by using 'Effect->Amplify' in your Audacity then you should get exactly the same result that SimpleGainVST would do when gain is set to 12 dB. That is the whole signal strengthened by 12 dB together with noise... +24 dB would also strengthen the whole …
Re: Falcosoft Soundfont Midi Player + Munt VSTi + BassMidi VSTi
Posted on 2019-03-27, 21:58
OK. I do not think you fully understand what my Gain VST plugin can do. Even if the 'source volume' is the problem that causes noise, SimpleGainVST cannot magically correct the characteristics of SC-VA's sound generation. If the noise is there when SC-VA generates the tones (it does not matter what …
Re: Falcosoft Soundfont Midi Player + Munt VSTi + BassMidi VSTi
Posted on 2019-03-27, 21:18
My practical situation requires this value. Because i'm tired of high-frequency noises in recordings of SCVA samples that I can't fully reduce (I'm about Rock Organ, French Horn, Accordion, Bandoneon, and some others. All that samples were super-panned). To be honest I do not understand how adding …
Re: Falcosoft Soundfont Midi Player + Munt VSTi + BassMidi VSTi
Posted on 2019-03-27, 16:56
I have crazy idea for Simple Gain VST. How's about increase gain range max value to 24 dB? The current max value of +12 dB means the original signal can be boosted to ~4x. 24 dB would mean a ~16x boost. It's really crazy. I can not imagine any practical situations where a 16x boost would be …
Re: Problem getting Retro PC + USB Midi to work
Posted on 2019-03-26, 16:14
... You could even have two different USB devices hooked up, running two different MIDI devices at the same time (for example one MT32, the other Sound Canvas). That's my plan since I got two USB devices but I still need to test and see if MIDI Player even allows for two iterations. If you mean 2 …
Re: Falcosoft Soundfont Midi Player + Munt VSTi + BassMidi VSTi
Posted on 2019-03-26, 12:41
Something completely different :) I have made a Midi + SF2 conversion from Analog Devices Sound Demo that was included in the driver package and used Riff Midi (.rmi) files with included DLS soundfonts. Original: http://www.vgmpf.com/Wiki/index.php?title=Analog_Devices_Sound_Demo_(W32) http://www. …
Re: Falcosoft Soundfont Midi Player + Munt VSTi + BassMidi VSTi
Posted on 2019-03-26, 10:22
Ah, I see. That's very strange though; a roland GM/GS device having overflow issues with just simple GM/GS midi files is incomprehensible. If you are talking about Roland User's Freeze-2.mid file that you tested, it's not just a simple GM/GS midi file. It contains unusually many Midi messages/sec ( …
Re: Falcosoft Soundfont Midi Player + Munt VSTi + BassMidi VSTi
Posted on 2019-03-26, 05:04
appiah4 wrote: Could the delay sysex messages function help with my buffer overflow issue as well? I do not think so. Your buffer problem is not SysEx related at all. You could get buffer full error while processing simple channel messages.
Re: Falcosoft Soundfont Midi Player + Munt VSTi + BassMidi VSTi
Posted on 2019-03-24, 10:44
Edit: What happens if you select 'XG_ON.syx' custom SysEx in the right click context menu of Reset button -> Select/Send Custom SysEx dialog and then set Delay between sysEx chunks to a high value e.g. 250ms (and then of course select this 'XG_ON' as Reset type) ? Seem with 250MS this is working. …
Page 59 of 100