Re: Carmageddon doesn't work when my SLI is activated
Posted on 2016-10-31, 18:22
No idea ? 🙁 I'd like to see how the game performs with the SLI 🙁
Re: K6-2 processor in K6 motherboard?
Posted on 2016-10-31, 12:13
Also, how low can you set the cpu voltage ? I wouldn't put a K6-2 if the minimum voltage is 2.8v I've got a socket 7 motherboard that can go to 2.5v so I tried a K6-2 450 that required 2.4v and guess what ? The computer was constantly crashing because the vrm ran too hot. I added a fan on the …
Re: Intel VS440FX refuses to boot DOS 6.22 from detected SSD
Posted on 2016-10-30, 14:10
What is your bios ? An award bios ? I know that award bioses had issues with HDDs bigger than 32GB at some point
Re: Retro Gaming PC (1998)
Posted on 2016-10-29, 22:22
Voodoo_2.jpg But I did notice.... on the last working SLI tab, it used to say 8MB Frame Memory and 16MB Texture Memory...that's an aggregate total of both 12MB video cards together. Now admittedly this is misleading because the two cards are operating in parallel in order to speed up total …
Re: Carmageddon doesn't work when my SLI is activated
Posted on 2016-10-29, 17:47
Yes, every other games are working with that SLI. There is just POD that doesn't want to work properly with or without the SLI, but this is another problem and I already made a thread for that. But half life, unreal, unreal tournament, tomb raider, etc are working with that SLI
Carmageddon doesn't work when my SLI is activated
Posted on 2016-10-29, 09:56
Hi everyone I'm having a problem with carmageddon. It doesn't really work when my SLI is activated. In fact, when I activate the sli and start carmageddon, the game starts, but in the regular mode O_o When I stop the game, here is what the dos prompt says : http://image.noelshack.com/fichiers/2016/ …
Re: Retro Gaming PC (1998)
Posted on 2016-10-28, 12:04
I remember that this crashed when my SLI cable was broken. Try each card separately ?
Re: Are Geforce 256s rare or hard to find?
Posted on 2016-10-27, 13:10
That is odd, I didn't notice any problems with the card so far. Are you sure there is nothing other triggers this problem? IDE controller problem? If you want to test the ram of the vga card try the tools on this page: https://www.raymond.cc/blog/having-problems-with-video-card-stress-test-its- …
Re: Are Geforce 256s rare or hard to find?
Posted on 2016-10-27, 11:58
I got Lucky and scored one last year in the Netherlands. An Asus V6600 deluxe :happy: I've got the exact same card as you one or two month ago, but mine seems to have issues ... As I was answered, the few errors that I had with half life were just incompatibilities with my version, but as I said …
Re: Yellowing Plastic
Posted on 2016-10-25, 05:38
Yeah, I started de-yellow my 486 case when I heared of that. And since I messed it (the white wasn't uniform), I painted it instead. Not as great as if the plastic itself was white, but not as bad as before. But I think that the paint that I used wasn't the best in term of how it attach to plastic. …
Re: Pentium II mobo may be dead.
Posted on 2016-10-23, 08:04
Well with an AT psu you won't have that issue because the power switch on AT psus acts just like if you were unpluging your board. Maybe you could use the ATX psu and use an ATX to AT adaptor and use your atx psu just like if it was an AT psu. Be careful though, ATX psu in an AT case would be upside …
Re: UC4915 no POST code
Posted on 2016-10-22, 20:10
Okay so I tried to clean this with alcohol, but it did not seem to have changed anything :s
Re: 5.25 Floppy drive shows dir but wont open files.
Posted on 2016-10-12, 07:43
To me it looks more like a head misalignment or a sector misalignment than a dusty head because once he formated his floppy, it was functionnal. If you have another disk drive that is known to be working perfectly or if you know someone that has one, try the formated floppy on this disk drive. If it …
Re: Mouse Polling Rate in Windows 98SE
Posted on 2016-10-12, 07:38
Try "PS/2 rate" ? Windows 9x refresh ps/2 mouses at 40Hz, not 100Hz (or if it does, you probably did something special before)
Re: POD doesn't allow me to install the 3Dfx version
Posted on 2016-10-12, 05:58
This patch is the same that I used earlier
Re: Want to Build Retro Gaming PC - What to Buy?
Posted on 2016-10-11, 09:37
Be careful with pentiums 3 over 1ghz because the 1.13GHz model il known to be buggy and the other one are newer revisions of the core so they don't work on every motherboard
Re: S3 video card
Posted on 2016-10-10, 22:13
What is the size of the video RAM ? (Even though having only 256KB of ram on this would be odd)
Re: POD doesn't allow me to install the 3Dfx version
Posted on 2016-10-10, 21:49
I'm launching the exe directly from the directory. The version of the exe is 2.1.0.0 Here is the actual content of the pod directory : - data - InstData - PODMMX.exe - Scope - Readme.txt - Wpod3dfx.exe - glide2x.ovl - glide2x.dll WPod3dfx.exe and the glide2x files were added by the patch
Re: Retro Gaming PC (1998)
Posted on 2016-10-10, 19:22
Yeah, they are smooth, but at least on my pentium 400 (overclocked to 448), they are running too fast wich is a problem 😒
Re: Want to Build Retro Gaming PC - What to Buy?
Posted on 2016-10-10, 13:52
A socket 370 motherboard or a late slot 1 board for the intel side and a socket A or a slot A (very rare though) for the AMD side. The ram will probably be SDRAM and even though people nowadays tend to put as ram as they can, 128-256MB of ram should be enough. As long as you don't go over 1GB (or …
Page 166 of 170