Re: Voodoo 5 5500 problem after flashing Bios

Posted on 2020-09-26, 22:33

by

by mmmark84

in Marvin \ Video

in Marvin \ Video

Ensure your PSU has loads of amps on the 5v rail. The card worked fine before I flashed it. I doubt its both of my PSU's that are now insufficiant in both the P3 and the Athlon system? the P3 has a brand new PSU with 16A 5V, the athlon system has a brand new PSU with 24A 5V. Again, card worked fine …

---

Re: Voodoo 5 5500 problem after flashing Bios

Posted on 2020-09-26, 21:40

by

by mmmark84

in Marvin \ Video

in Marvin \ Video

I tried both. First try was on the TK333 system with only the V5 attached. that succeeded but began the problems with the screwed output when I power cycled the machine. last 3 tries was on the P3 system with a S3 virge dx/gx PCI card as my main output. I see there is also a dump tool on that site, …

---

Re: Voodoo 5 5500 problem after flashing Bios

Posted on 2020-09-26, 21:16

by

by mmmark84

in Marvin \ Video

in Marvin \ Video

I flashed the bios according to these instructions: https://3dfxbios.stantoworld.co.uk/html/faq.html#5 How can I make sure the bios EEPROM is OK? I flashed it successfully multiple times, according to the output of FLASH.EXE ( it said it succeeded and I needed to turn of power) I booted in msdos by …

---

Re: Voodoo 5 5500 problem after flashing Bios

Posted on 2020-09-26, 21:07

by

by mmmark84

in Marvin \ Video

in Marvin \ Video

I just noticed this thread: Voodoo 5 5500 Repair (project thread) Seeing as the boot window of win98 is the same as mine: Im beginning to loose all hope...

---

Voodoo 5 5500 problem after flashing Bios

Posted on 2020-09-26, 20:27

by

by mmmark84

in Marvin \ Video

in Marvin \ Video

Hi! I have been playing with a voodoo 5 5500 AGP since last week on a P3 system with a Asus CUSL2-C motherboard and 512MB ram. The card worked great in that system, but I wanted a more powerfull system :) So I received a nice A7V333 motherboard today with a athlon XP 3000+ barton CPU, as I …

---

Re: Voodoo 3 3000 AGP under performing?

Posted on 2020-09-25, 18:20

by

by mmmark84

in Marvin \ Video

in Marvin \ Video

Im not sure if this will help you, but I ran 3dmark99 max just now on this system: Asus P5A motherboard AMD K6-III 550 Mhz 512MB PC133 Windows 98SE (just stock install from CD) Voodoo 3 3500 with driver 4.12.01.1222 I dunno how much of a difference a 3500 makes vs a 3000. 3746 3DMarks 7799 CPU …

---

Voodoo 5 5500 AGP missing cap

Posted on 2020-09-25, 14:49

by

by mmmark84

in Marvin \ Video

in Marvin \ Video

Hello! After years of lurking on ebay every now and then, I finaly got me a voodoo 5 5500 AGP. The card arived today and it works just fine on a little test bench I made with a P3 1Ghz. https://tweakers.net/fotoalbum/image/ekj3AhBYaGC7A9r0gZtLScy4.jpg https://tweakers.net/fotoalbum/image/ …

---

Re: Looking for a 9700 pro owner with eletronic knowledge

Posted on 2017-07-09, 15:59

by

by mmmark84

in Marvin \ Video

in Marvin \ Video

Thx for the extra effort Jepael. I tried to put a 100nF on it to see if that did anything before your post, cause I figured something like that too. But after a few minutes of success, the artifacts started to appear again and during windows installation I got a black screen once again... I know …

---

Looking for a 9700 pro owner with eletronic knowledge

Posted on 2017-07-09, 15:06

by

by mmmark84

in Marvin \ Video

in Marvin \ Video

Hi, Can any 9700 pro owner help me with the identification of the following component: http://i.imgur.com/BqEe1d9.jpg?1 http://i.imgur.com/3bxODN1.jpg That little capacitor is missing on mine (broken off) which makes the card display artifacts and eventualy a black screen. I think that would be the …

---

Re: Fastest pc you have win98 on? (besides emulation)

Posted on 2017-01-20, 17:13

by

by mmmark84

in Marvin \ System Specs

in Marvin \ System Specs

I am almost done with my fastest win98 machine, just needs installation in a case: Motherboard: Asrock 775i65G R3.0 CPU: Pentium Dual Core E5800 RAM: 2x twinMOS m2g9i08a-tt 256MB PC3200 CL2.5 Videocard: Geforce 6800 ultra AGP Soundcard: Aureal vortex II HDD: 128GB SSD sata Monitor: Dell Ultrasharp …

---

Re: Flashing the Gotek floppy emulator with HxC firmware

Posted on 2017-01-01, 16:39

by

by mmmark84

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

So... I added some pin headers to the program port of the PCB of the Gotek. Got a USB TTL-232R-3V3 and rearanged the pins to fit the new pins. Got the account created and flashed the drive with HxC bootloader firmware. Updated the firmware with a usb stick. Put the mode in "indexed" mode by placing …

---

Re: Flashing the Gotek floppy emulator with HxC firmware

Posted on 2016-12-30, 05:51

by

by mmmark84

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

As I understand it, I need to get a account for 10 euro's to flash the bootloader. I contacted the guy, because I dont have many options left I guess... I can't find the original firmware anywhere. Seems HxC supports allot more advanced features anyway, so hopefully its not all a loss 😀

---

Re: Gotek with amiga firmware on PC

Posted on 2016-12-29, 21:59

by

by mmmark84

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Seems this Flashing the Gotek floppy emulator with HxC firmware could be my answer... ? 😕

---

Re: Flashing the Gotek floppy emulator with HxC firmware

Posted on 2016-12-29, 21:57

by

by mmmark84

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I bought a amiga flashed gotek emulator by mistake... Am I to understand that if I flash this HxC firmware, I can use it in my PC again with the default tools found on http://www.ipcas.com/support/usb-floppy-emula … n-download.html ? I can't seem to find the normal gotek firmware anywhere...

---

Re: Gotek with amiga firmware on PC

Posted on 2016-12-29, 21:43

by

by mmmark84

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I know phill, maybe my post was a bit long, but that conclusion is all in there. I was just wondering if someone knows where I can find the normal firmware and flash it. At my work we have FTDI TTL-232R-3V3 cables, so I think flashing it wont be a problem, if I use the guide on how to flash the …

---

Gotek with amiga firmware on PC

Posted on 2016-12-29, 21:32

by

by mmmark84

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

So I bought one of those Gotek USB floppy emulators, hoping to get some sweet floppy images on a usb stick. I bought it online, but was advertised as "amiga gotek floppy emulator". I asked the seller if it can be used with PC, and he said yes... Little that I know, that amiga compatibility comes …

---

Re: Help building a DOS machine and a windows 98 machine

Posted on 2016-12-28, 18:13

by

by mmmark84

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Nice collection meljor, I like asus allot too. Got a p8p67 pro as my daily driver. I also have a An8x-e somewhere, but not realy a good athlon processor. 2x 2400+ and a 1200. I would love to have a Slot A setup too, I had a slot A 800 back in the day. But I think I will keep 3 systems assembled for …

---

Re: Help building a DOS machine and a windows 98 machine

Posted on 2016-12-27, 21:39

by

by mmmark84

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Thanks Phil! Its pretty much a copy paste of your machine :lol: But that setmul program kinda made it mandatory to buy the K6-III+ platform. The menu for the memory options in DOS mode was such a relief for me. I remember back in the day the amount of problems I had with those damn memory hogging …

---

Re: Help building a DOS machine and a windows 98 machine

Posted on 2016-12-27, 17:12

by

by mmmark84

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Thanks! Good point about the heat sink. however it is resting against the PCI slots (I drilled the holes that way) so I was hoping this wont be a problem, because its stuck in a corner that way. then again, its not that heavy at all. CC is a nice game, played it allot when I was a kid. damn those …

---

Re: Bought these (retro) hardware today

Posted on 2016-12-24, 11:51

by

by mmmark84

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

The ultra is always dual slot as far as I know... the cooler is anyways, the IO slot could not be.

---