Re: Video Card for a Shuttle XPC Pentium 4, 200 Watt PSU

Posted on 2024-05-20, 15:49

by

by RockstarRunner

in Marvin \ Video

in Marvin \ Video

I put together a pc using a shuttle xpc ss51g barebones system, I think it was when they finally got an AGP slot, so could be the same. Anyway, it was a P4 and I paired it with the then new 9700 Pro, it kicked so much a55.

---

Re: ASUS P2B-B Voltage regulator swap - Adding support for coppermine processors

Posted on 2024-05-03, 18:49

by

by RockstarRunner

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Check this, you may already have the newer chip, depends on revision. That said, if you have the older chip, you should be able to swap it, it's pin compatible, and some revisions do have the chip. Re: Asus P2B-F Slot 1 Retro PC

---

Re: FIC 486-GAC-2 proprietary cache module - open source reproduction *Completed*

Posted on 2024-04-21, 07:39

by

by RockstarRunner

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I'm thinking, would the RetroWeb want links to the GitHub for the relevant boards pages?

---

Re: FIC 486-GAC-2 and proprietary cache module - Reproduction works! Revised 'final' PCB ordered..

Posted on 2024-04-19, 20:06

by

by RockstarRunner

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Miisalo transplanted the chips from the prototype to the final revision today! IMG_20240419_202254.jpg IMG_20240419_225534.jpg IMG20240419214121.jpg First test, the machine didn't boot, but turned out there was some solder balls hiding in a couple of spots, a side effect of resoldering chips and …

---

Re: Another "cannot get CF2IDE to work in DOS" topic

Posted on 2024-04-17, 15:02

by

by RockstarRunner

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

From my personal experience fighting this exact scenario, of trying to get a CF card to behave in master/slave config, it was 100% the cards I was trying at fault, not the adapters or cables. You have to get a card that *truly* supports master/slave, most industrial cards do.

---

Re: FIC 486-GAC-2 and proprietary cache module - Reproduction works! Revised 'final' PCB ordered..

Posted on 2024-04-15, 08:50

by

by RockstarRunner

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Pcbs turned up! We have edge connectors this time 😆 Will assemble this Friday, I expect, then I'll report the results. Filename IMG20240415114705.jpg File size 1.37 MiB Views 464 views File comment Final version PCB File license Fair use/fair dealing exception

---

Re: FIC 486-GAC-2 and proprietary cache module - Prototype works! Revision in progress.

Posted on 2024-03-23, 09:41

by

by RockstarRunner

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I'll order another run of 5 PCBs today. Exciting stuff.

---

Re: FIC 486-GAC-2 and proprietary cache module - Prototype works! Revision in progress.

Posted on 2024-03-22, 18:22

by

by RockstarRunner

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

After blood returned to brain from weight lifting, we understood the assignment 😆 Filename IMG_20240322_202012.jpg File size 40.66 KiB Views 665 views File license Fair use/fair dealing exception Filename IMG_20240322_201935.jpg File size 108.42 KiB Views 665 views File license Fair use/fair …

---

Re: FIC 486-GAC-2 and proprietary cache module - Prototype works! Revision in progress.

Posted on 2024-03-20, 06:15

by

by RockstarRunner

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

By 'same as last one' I meant the version where you increased the pads going under the chip, to which we determined makes that much better for hot air soldering, but still difficult with an iron, hence why wider pads to the outside direction could help with that I'll try and get that printed/checked …

---

Re: FIC 486-GAC-2 and proprietary cache module - Prototype works! Revision in progress.

Posted on 2024-03-19, 18:35

by

by RockstarRunner

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

We printed the PCB, the SRAM pads look quite the same as the last one, you did link the latest version? Bottom line is it can be soldered by someone who is good, but to make it possible for less capable people (myself 😉) the pads could be maybe twice as wide, to the outside direction.

---

Re: SB AWE32 + SB Live! Value - Hanging Note Workaround? Is it a good DOS/Windows combo?

Posted on 2024-03-08, 09:39

by

by RockstarRunner

in Marvin \ Sound

in Marvin \ Sound

How do you feel about soldering? Re: The Soundblaster DSP project Hanging note bug has been fixed, among a few other things.

---

Re: FIC 486-GAC-2 and proprietary cache module - Prototype works! Revision in progress.

Posted on 2024-03-08, 08:30

by

by RockstarRunner

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

@rasz_pl if you feel there is nothing else to tweak/test, I could order another set of boards, and confirm the revision is working.

---

Re: FIC 486-GAC-2 and proprietary cache module - Prototype works! Revision in progress.

Posted on 2024-03-06, 20:40

by

by RockstarRunner

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I still vote for just removing the jumpers all together, and hard wire it for 256k 😁

---

Re: FIC 486-GAC-2 and proprietary cache module - Prototype works! Revision in progress.

Posted on 2024-03-06, 13:43

by

by RockstarRunner

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Results of 64/128KB configurations Sorry this has taken so long. This is what happens when I configure the jumpers to 64 and 128, with the full set of srams installed (just like 256k mode). 64 IMG20240306151018~2.jpg 64kb is recognized, but the system just sits there before actually running config. …

---

Re: FIC 486-GAC-2 and proprietary cache module - Prototype works! Revision in progress.

Posted on 2024-03-01, 19:29

by

by RockstarRunner

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Briefly, but I have faster machines if I need even more speed. Besides those 5x86 CPUs are just collector prices these days

---

Re: FIC 486-GAC-2 and proprietary cache module - Prototype works! Revision in progress.

Posted on 2024-03-01, 18:36

by

by RockstarRunner

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Chip on 2.4 paper version Filename IMG_20240301_203533.jpg File size 390.99 KiB Views 462 views File comment 2.4 print with chip File license Fair use/fair dealing exception

---

Re: FIC 486-GAC-2 and proprietary cache module - Prototype works! Revision in progress.

Posted on 2024-02-29, 18:31

by

by RockstarRunner

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Setting cache timing to Turbo improved things a bit (previous tests were set to Fast) SpeedSys Memory bandwidth: 55.04 System score: 42.67 L1: 66.6 L2: 43.89 Main: 24.93 Doom max: 37.2 fps Quake TD: 10.6 fps This gets me right about Majestyk's scores posted on page 1 IMG20240229203313~2.jpg I'm …

---

Re: FIC 486-GAC-2 and proprietary cache module - Prototype works! Revision in progress.

Posted on 2024-02-29, 16:58

by

by RockstarRunner

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Prototype Test Results | Benchmark | No L2 Cache | 256K L2 Cache | Percentage change | ---------------------------------------------------- | 3DBench Slow | 52.6 | 66.6 | +26% | | 3DBench Fast | 50.0 | 62.9 | +26% | | Chris's 3DB | 34.2 fps | 38.3 fps | +12% | | Chris's 3DB VGA | 10.3 fps | 11.5 …

---

Re: FIC 486-GAC-2 and proprietary cache module - Prototype works! Revision in progress.

Posted on 2024-02-29, 15:55

by

by RockstarRunner

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Paar wrote on 2024-02-29, 15:10: Will you make it open source? ItAlwaysHasBeen_meme.gif 😉

---

Re: FIC 486-GAC-2 and proprietary cache module - Prototype works! Revision in progress.

Posted on 2024-02-29, 14:19

by

by RockstarRunner

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Filename IMG20240229161319~2.jpg File size 825.45 KiB Views 587 views File comment Proto side 1 File license Fair use/fair dealing exception Filename IMG20240229161331~2.jpg File size 872.19 KiB Views 587 views File comment Proto side 2 File license Fair use/fair dealing exception Filename …

---