Hi all, just curious... are Radeon 9800 XT's very hard to find? I've had alerts set on eBay for nearly two months with no luck. Currently have a 9800 Pro but looking to snipe an XT. If anyone on here is selling one I'd be interested.

N64 emulation has also been very far from perfect. Actually I've found it downright unplayable, granted I haven't tried in a couple years.

Spread spectrum is a feature designed to reduce EMI in the operating frequency (66MHz bus speed in this case) by messing around with the exact frequency. If you're indoors and using a metal case, it shouldn't matter and you can safely disable it. Then again, if you're so close to the limit at stock …

One question though: why choose a Pentium 233MMX on a board that could easily handle a K6-2 550? You can always run the latter at 233MHz if you want that level of performance... I've struggled with the idea of keeping things "old school slow" vs "performance old school", and knowing where the draw …

Wow overwhelming replies. Strangely the voltage jumper was already set to 2.8v from the past owner with no issues. Definitely have it right jumper as the pins are numbered on the silkscreen of the mobo. The PA-2013 supports dual rail voltage and 233MMX is spec'd as supported in the manual. I …

Hi All, long time lurker here that needs some advice. I've been running a Pentium 133 in my FIC PA-2013 for some time, mostly to play Diablo and run old software for kicks. I've had a Pentium 233 MMX that I ordered off eBay sitting in a box for some time and finally decided to install it yesterday. …

Sintechi comes up when auto-discovering during boot. Maybe I have been fortunate thus far with it 😀

Jo22 wrote: gompertz wrote: Does anyone know of any alternatives? Yup. Just install an IDE-SD adapter inside of an old removable drive bay for IDE HDDs. 😁 May be the way I end up going as my adapter has mounting holes 😀

For what it's worth this is the one I bought off eBay ~12 months back and have had no issues with it on my PA-2013 board with DOS/Win98 http://www.ebay.ca/itm/182483849339 If there was some sort of IDE to USB2/3 pin header adapter one could also use a modern day multi-card front panel reader. I …

Hi all, long time lurker here; figured I'd take a stab and participate online. =] I've been looking for a front pane l IDE to SD adapter and all I've been able to locate is this: http://www.addonics.com/products/AEUDMD4.php Does anyone know of any alternatives? Only curious because of price and not …