Hi All One of my friends has a very special 386 motherboard that I have never seen before. I have hunted all major motherboard websites for its layout/model but had no luck. Bios doesn’t show anything regarding model/make. Distinguishable Features - 16x SIPP Sockets - Onboard Com/LPT via SIS82C452 - …

Hey guys I recently acquired this OR840 Engineering Sample System in Adelaide, Australia. My friend saved it from the crusher! I hope to find what original expansion cards & hdd it had. PSU will need recapping as its shot. Photos https://live.staticflickr.com/65535/49963486786_ff93c029ab_b.jpg …

Loving the green theme. Definitely needed a windowed case to show it all off as well. besides has better airflow right. Duel CPU, Rambus, Voodoo5, Vortex 2. man that gets you into quite a few little elite groups here. I'm not even a member of the last 2! Thankyou You didn’t notice the part where I …

1. Introduction Hi All! Thought i'd share one of my recent pickups. A Fujitsu Siemens Celsius 670 Workstation! I've wanted one of these for a long long time, especially the DF400 motherboard since it supports 4GB of Rambus PC800!. This is going to be a fun project, such hardware back in 2003 cost a …

4.0 The Build! First, Let's get the board, power supply, and expansion cards in! Mounting was very straight forward, just like building a normal machine with a ATX Form factor board. I ended up using a Antec TruePower 550Watt due to it's 40AMP 5V Rail and 6Pin AUX Connector. I decided to use a …

Thought i'll join in with this post Here is 2 of around 25 machines that I have Avenger-M99 Tualatin Celeron 1.4ghz / 100Mhz FSB on Powerleap Slot-T Adapter Epox BX3 440BX 512MB 2x256MB PC-133 Diamond S3 Savage2000 32MB Quantum3D Obsidian X24 24MB (Voodoo2 SLI on a Single Card) 3COM 3905B 10/100 …

1. Welcome Hi! I'm Declan from Australia. This is my first time posting here on Vogons, yet alone posting a build log! I'm usually most active on Facebook (Retro Machines) and my personal Instagram (nostalgichardware) Anyway let's jump to the good stuff!, This is my Year 2000 Build with a few …

Okay, just another update. I finally got the P3/S CPUs. It took about a month to get them. I tried them in my 815EEA board first and it was a no go, the board would halt with an error. I tried one in the OR840 and it works! I'm going to try both CPUs and I'll run some benchmarks and post an update. …

Hey guys Im the guy from Australia. Thanks silvercr for selling the OR with Slotkets to me I ordered four unmodded Tualatin 1.4s 2.5 months ago to do the wire mod to finish the slotkets and still haven’t received them. Had to open a ebay dispute.. so i am without dual processors. I have tried the …