Ok that is what I thought so as long at the 16v's physically fit I'm good. thanks just need the sanity check

When recapping a motherboard I know you have to match the capacitance for the caps but can go Higher on the voltage where a 1500uf 10v (replacement) ----- 1500uf 6.3v (original) and 1500uf 16v (replacement) ----- 1500uf 10v (original) would work. but how far out of the original Voltage spec is to …

Below is my collection of 486 Mb. I'm looking to build a 486dx133 . But each board has a bit of a issue when it comes to building with them. The GEM? board seems to be the best (does boot DOS) Gem (1).jpg has EDO support, but will not max out on ram maxes out at 64mb not 128mb. all4 ram banks work …

Deksor wrote on 2022-01-10, 22:34: Could you please run this from DOS to dump your bios ? http://cd.textfiles.com/microhaus/mhblackbox3 … MORY/GETROM.ZIP (Or dump the roms directly with an eprom reader if you have one), that way I can add it to the page ? It would probably help find out who made …

Might just be the excuse I need for my wife to let me buy a 3d printer.

Does any happen to know where I can find drive rails compatible with the Tandy 1000 SL's Lower 5 1/4" floppy bay. does not need to be the exact Tandy rails just something good enough.

snufkin wrote on 2022-01-10, 17:09: Similar layout and jumper locations as this one maybe: https://www.ultimateretro.net/en/motherboards/5169#downloads Perfect other then bank numbering that looks just like it and the jumpers seem to be working as shown. THANK YOU

I have a 286 board I need help(the jumper settings with). G2-102 Headland very similar to the Motherboard: LM-103S http://minuszerodegrees.net/at_clone_bios/at_clone_bios.htm Board originally had 1025KB Onboard RAM via DIPs and 2 banks of 30 pin rows soldered over. I removed the solder from the …

MSI 694D Pro V1.0 Motherboard (seller photo). Looks like it comes with some RAM and CPU's as well, but I don't know what they are yet. Unsure if this board can support a dual Tualatin mod, but I'll find out. If not, I'll just stick with some 1GHz PIII's. https://i.imgur.com/2EIL8l8h.jpg Let us(me) …

Hope this is in the right area for some support. I have a recently recapped MSI 694D Pro dual Socket 370 motherboard and a matched pair of modded Pentium III 1.4 Ghz chips. My issue is that when both chips are installed, the system is unstable BSOD, MEMTEST86 displays memory errors, PC-CHECK shows …