Line-in source of Orpheus sounds well through SDPIF with Unisound v.0.77a. I've tested it. Thank you, Jazefox.

Looks nice! And 3.5" definitely improved.

Thank you for the advise, I'm satisfying enough to be clearly aware it is an issue.

To make cause of the problem clear, I have tested more with an Orpheus card and Unisound driver. And finally I found what specific condition makes S/PDIF output not sounds a line-in sound source. 😀 That was a moment when a game initialized SB PCM sound. At that moment, sound from Line-in going …

Hi, a. are you still using P0 in your "set blaster=" variable? because it is always needed if you don't want to use CSMPU - nonmatter if it's disabled in eeprom Parameter “P0” in SET BLASTER= was no help and further tried gave “U0” in order not to allocate any IRQ to CSMPU but no difference, too. …

I am worry if here's correct place to ask. but I think it's quite related to Unisound. I'm using two ISA cards on ISA slot. One is a Orpheus with PCMIDI and another one is a PCMIDI standalone card. As CS MIDI on the Orpheus isn't used anymore, CS MIDI on Orpheus was turned completely off by EEPROM …

Here's my case, my chasis (Inwin C583) doesn't provide two screw holes corresponding front postion of floppy drive screw holes. It has only one screw hole out there, No luck! and quite strange why they considered only one screw there. Anyway I need to something additonal to fix. It'd be a good idea …

https://github.com/gmcn42/mt32-pi-control Many Thanks the link, I've found MT32-pi.exe a DOS executable. I Hope that I adressed correctly. It properly functions to reset, reboot and others to McCake, too. I can say it is versatile and a super convenient DOS executable with those parameters defined …

If you want to reset the synths without a full reboot of the Raspberry Pi, you can just use a standard MT-32 reset or a GM/GS reset SysEx message, but only when in the respective synth modes. MT-32: F0 41 10 16 12 7F 01 F7 GM: F0 7E 7F 09 01 F7 GS: F0 41 10 42 12 40 00 7F 00 41 F7 mt32-pi-control …

Hello, Is there a method to soft-reset McCake on DOS prompt, instead of cold boot a computer? This will depend on where you have the McCake connected. For instance, with Orpheus, the daughterboard receives a reset every time the card is re-initialised with ORPHINIT (when attached to the header on …

I feel now mic port should be dedicated to mic gear and not suitable to use with other kinds of sound sources. I wouldn't use mic port for sake of normal line-in purpose anyway. I'm not sure about the nature of the noise, but trying that always entails some risk. The microphone input has additional …

I feel now mic port should be dedicated to mic gear and not suitable to use with other kinds of sound sources. I wouldn't use mic port for sake of normal line-in purpose anyway. I'm not sure about the nature of the noise, but trying that always entails some risk. The microphone input has additional …

Hi, Any setting for SB-Input-select in orpheus.ini to simultaneously enable both line-in and mic? I have no idea what to do for getting both inputs, but either of them. That isn't something the Sound Blaster Pro compatibility allows. However, that is really only meant for selecting the input for …

Hello, Is there a method to soft-reset McCake on DOS prompt, instead of cold boot a computer?

Hi, Any setting for SB-Input-select in orpheus.ini to simultaneously enable both line-in and mic? I have no idea what to do for getting both inputs, but either of them.