Re: IDE ATA to Compact Flash Comprehensive test / Is it durable?
Posted on 2022-01-30, 16:28
I am very happy with the additional informations you provide This is true that there's very little information about wear leveling of CF Card
Re: IDE ATA to Compact Flash Comprehensive test / Is it durable?
Posted on 2022-01-29, 15:54
I have fully filled my CF card twice today Once with h2testw and second time with low level format I did benchmark tests after and read / write speeds are the same (4mb/s) but random acces time is a lot faster - dunno why it's 1.49ms instead of 1.79 - i repeat tests few times Edit - now it shows 1. …
Re: IDE ATA to Compact Flash Comprehensive test / Is it durable?
Posted on 2022-01-29, 09:42
CF card still works very well! (since 25.01) Thank you for helpful and interesting informations I did routine check-up today: 1) h2testw (full write and read test) 2) low level format 3)restore system backup and full scandisk Every test was OK, no single error
IDE ATA to Compact Flash Comprehensive test / Is it durable?
Posted on 2022-01-27, 13:16
There is a lot of contradictory information about Compact Flash to IDE storage. Some people say that the cf card is not usable for windows 9x with swap file. On the other hand, there is information that write cycles number is enough to use with windows 9x systems I would like to test it! My PC: …
Re: Do 40 Pin Compact Flash to IDE Adapters need power?
Posted on 2022-01-23, 22:42
guys - spolier alert! I will make another thread for an experiment! From many topics it turns out that the CF card is not recommended for Windows 95/98 I'll NOT turn off the virtual memory or defragmentation - the windows 95 will be in the default configuration I'll be using a 'evil' 5v Also i will …
Do 40 Pin Compact Flash to IDE Adapters need power?
Posted on 2022-01-22, 12:22
I want to connect CF Card to Ide - Intel Pentium 2 system Could I just ignore it or do i need to connect psu power? Should i set 3.3v (default) or 5v? I want to use it with generic 1gb kingston cf card 33x speed
Re: DEC Venturis 575 or 5120 wont boot after dallas RTC replaced
Posted on 2021-09-13, 20:02
Maybe there is a way to disable CMOS/Dallas, some board got this option if you got nothing to lose I would try to set different combinations on J16 jumpers I know it's a low chance, but maybe worth a try
Re: Compaq Presario 7150 not detecting hdd, could it be the dallas rtc?
Posted on 2021-09-13, 19:42
One day long time ago I read that some systems with broken dallas would not detect the disk or would not boot at all , it is very likely in this case also some motherboard got a jumper setting to disable CMOS/Dallas (and will start with default bios settings ) and this can help but i can't found …
Re: ECS P6BXT-A+ V1.3B weird issues
Posted on 2021-09-03, 11:02
Hi, I found out on some old forum that 1.3b is working up to 600MHz, this is normal for this version of the motherboard PIII 600MHz FSB100 seems to be max on this motherboard
Re: Strange and mysterious modification of Abit Be6
Posted on 2021-08-13, 00:48
I see there are two twins CP7, RN1 and CP8, RN2 The last one is intact, maybe I can somehow bypass CP7 and RN1, for example without connecting the memory to first slot or not using some device
Strange and mysterious modification of Abit Be6
Posted on 2021-08-12, 22:09
Hi, I got a Abit Be6 (not II) computer for cheap - years ago Today I noticed that the area around the red dots is slightly smeared with something green I washed it off quickly with alcohol and noticed something was wrong I read that the W144H chip has something to do with the spread spectrum I have …
ES1868F Sometimes not working in windows 98
Posted on 2020-03-11, 13:39
My spec: Pentium II 300 MHz 5×66 Gigabyte ga686lx4 ES1868F MODEL: MPB-000074 with midi (IRQ is set to 5, I didn't see any other device with irq5) Windows 98se with SP3. My problem: It seems that ES1868F sometimes is not working. There is no sound in Windows 98. I need to reset pc one or two times …
Re: SCSI2SD - Comparison of SCSI SD, CF, and HDD performance
Posted on 2020-03-09, 13:30
I got sd to ata (40pin) common Sintechi adapter for pc. I'm a little lazy and i have question if i can use clonezilla or other backup utility and transfer image from hdd to SD ata. Can it work?
Re: Pentium 2 @ 133 mhz project ,done
Posted on 2020-03-04, 16:59
@gerwin Thank you for the clarification, i will use 133 with cache enabled
Re: Pentium 2 @ 133 mhz project ,help
Posted on 2020-03-04, 15:20
I did tests and benchmarks @133 mhz to @300 mhz (i tried oc to 366 but it's not working). Extended version of CLKMUL setup from PARKE is working great. I didn't saw any problems and instability, if any problem will occur i will post in this thread. Thanks for help! 😀
Re: Pentium 2 @ 133 mhz project ,help
Posted on 2020-03-04, 11:56
It's working! I did use x5 multiplier and it realy is x133 with L2 enabled. Today I will post benchmark with different clocks.
Re: Pentium 2 @ 133 mhz project ,help
Posted on 2020-03-03, 10:52
Are you about that? on-off-off-on is suppose to be 5x multiplier and on-off-off-off is suppose to be 5.5x multiplier. Those are already shown in the picture. I have a different brand and model P2 motherboard that does match all those 3x-5.5x settings that are in the picture of the first post of …
Re: Pentium 2 @ 133 mhz project ,help
Posted on 2020-03-03, 01:33
gerwin wrote on 2020-03-02, 23:05: Klamath core CPU multiplier 2.0x with functional L2 cache should be like this: […] Show full quote Klamath core CPU multiplier 2.0x with functional L2 cache should be like this: 1-2-3-4 ON-off-off-ON or ON-off-off-off Many thanks!I will be home in two days and …
Re: Pentium 2 @ 133 mhz help
Posted on 2020-03-02, 21:28
Bump, before i will start messing around 😀 Do you guys think i can broke something if i try to set some random ratio on this motherboard?
Re: Pentium 2 @ 133 mhz help
Posted on 2020-03-02, 12:28
Thanks for nice info, it will be very usable in windows mode, but most of the time im using in pure dos
Page 1 of 3