Wow that's sounds grate, exception for the only two ISA slots available. I've used it for SoundBlasterAWE64Gold and a 3COM network card 🤔. I've upgraded to a Overdrive 100MHZ CPU and a 4GB CF Card. Tried a CPU Kingston 133MHZ with no luck due to the WB/WT not available. Could it be possible to mount …

By the way, as anyone ever noticed the WB/WT missing jumpers (P3)? I just bought an evergreen 5x86 133mhz that as a configurable cache mode, WT / WB, but when I set to WB I cannot boot into the OS, totally expected since this motherboard only supports (officialy) the SX2/DX2 cpus. But this missing …

By the way, as anyone ever noticed the WB/WT missing jumpers (P3)? I just bought an evergreen 5x86 133mhz that as a configurable cache mode, WT / WB, but when I set to WB I cannot boot into the OS, totally expected since this motherboard only supports (officialy) the SX2/DX2 cpus. But this missing …

I have now fixed this issue. I just reconfigured the BIOS setup one more time and it's sorted out. I wonder if this Bios can't handle multiple reconfigurations at one save iteration.

Just to add: I've check with another old Pentium computer what the disk geometry is , and also verifyed this on my Compaq with programs like "WHATIDE.EXE". They read out: Cylinders 8146 Head 16 Sectors 63 MB 4204 But in my Compaq Bios - Inspect function says: Cylinders 1018 Head 128 Sectors 63 MB …

Hi Ive recently configured this computer (CDS524) with a IDE to CF card adapter. Ive mounted a 4GB card to it and struggle to configure it. Ive managed to setup the BIOS, so I can now load into Win95 or DOS, but everytime i start the computer I get this anoying message: "The following configuration …

I will check that out! Thank

Wow, this looks spot on! Thanks

Hi, Just curious if someone have a smart setup for combining sound modules. I have two computer with AWE64 GOLD. Each soundcard is connected to each of their own midi module, MT-32 and SC-55. Is there any possibility to daisychain this setup with a kind of a simple switch? Or do I have to reconnect …

I have actually solved this problem. I ordered a new cable Gameport to MT-32. This new cable is a bit thicker. Its all working 😀

Hi! I see there are many threads about how the MT-32 should be connected. I have looked at everything from YouTube videos and read forums. I'll try a thread in here and hope someone takes the time if they know the problem. HARDWARE: COMPAQ CDS 524 SOUNDBLASTER AWE64 GOLD MT-32 SOFTWARE: WINDOWS 95 …

I've recently bought a MT-32, connected it to AWE64 and tried using Softmpu. I don't get any contact with the mt-32. Anyone else have this issue? Connected gameport to mt-32 the to in port. Connected mt-32 to input on awe64.

I have the same issue 😒

I dont know if this hread is dead, but anyways... Finished today with my CDS524 update: HARDWARE: I have kept the 486dx 66mhz (will consider upgrade) 36MB RAM 850MB HD SB AWE64 with MT-32 Compaq CD-ROM 40x SOFTWARE: Installed BIOS on partition - F10 works perfect WIN 95 PLUS! LOTS of LucasARTs games …

Thanks to these posts I've managed to recover a CDS524 myself. I'm waiting for a CMOS battery from eBay. Still using Compaq diagnosis every time I start up. I've install a AWE64 Gold, and still looking around for a Roland MT-32. It has 24MB RAM and a 850MB HD. Tried putting in a 48x CD ROM, loaded …

I guess you sorted this out by finding the two screws in bottom front? Did you have any issues with loading CDROM? I recently bought a 48X from a Quad speed CD ROM. The Quad speed works fine, but the 48x doesn't respond twhne I use DIR command in DOS.