Re: Potential issue with SoundBlaster CT1600 ?

Posted on 2024-02-02, 21:06

by

by maverick1234

in Marvin \ Sound

in Marvin \ Sound

It's actually working in Win98 now. All I had to do is to manually add SB Pro (in add hardware) & install procedure went fine, without any errors, unlike before when I tried auto detection and it would hang in the middle so I'd have to reboot. Thank you all, glad it's working now.

---

Re: Potential issue with SoundBlaster CT1600 ?

Posted on 2024-01-30, 09:57

by

by maverick1234

in Marvin \ Sound

in Marvin \ Sound

It's the same outcome, I've tried hardware detection, but no success. I've followed the same installation order/procedure as on the previous build (which is working as mentioned earlier) & nothing happens. I don't even get a unknown hardware notification or something like that.

---

Potential issue with SoundBlaster CT1600 ?

Posted on 2024-01-30, 08:42

by

by maverick1234

in Marvin \ Sound

in Marvin \ Sound

Hello, I've recently put together another dual boot system (DOS 6.22 & Win98SE) & while the soundcard is nicely detected & working flawlessly in DOS, I can't get it to work in Win98. I didn't get any error notifications but it's like the card it's not even detected in Windows. System specs: QDI …

---

Re: DOS working mouse

Posted on 2021-10-26, 19:41

by

by maverick1234

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Thank you all, I appreciate all your help 😀

---

DOS working mouse

Posted on 2021-10-25, 18:59

by

by maverick1234

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Hi, recently I've put together 3 DOS/Win98SE based machines, everything's working fine...except 1 little problem, I can't get any USB mouse (A4 Tech X-718BK) to work in a proper DOS mode (6.22). I've tried every driver I could find, even tried with a converter and no success. Does anyone have any …

---

Re: Voodoo for DOS/W98SE gaming ?

Posted on 2021-02-23, 14:04

by

by maverick1234

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Well, I have two setup options, one is Gigabyte GA-7IXE4 with Amd Duron 700MHz & 512 Mb SDRAM and the other one is QDI Advance 10B with Celeron 1.1 GHz & 1.5 Gb SDRAM. Had both of them laying around so I've thought I'd make a better use for them, even wanted to make one with Dos 6.22/Win98SE & …

---

Voodoo for DOS/W98SE gaming ?

Posted on 2021-02-21, 23:00

by

by maverick1234

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Hi. I've recently acquired a few Voodoo cards, to be more specific ... Creative Labs CT6670 3Dfx Voodoo 2 PCI , 3Dfx Voodoo 3 3000 AGP & 3Dfx Voodoo 4 4500 AGP. I have installed MS DOS 6.22 & Win98SE & configured as dual boot. Would a better option be just one card or Voodoo2 paired with another …

---

Re: No beeps, no post, no display...

Posted on 2020-07-10, 20:50

by

by maverick1234

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I've tested with a motherboard that I borrowed; graphics card, sound card, RAM & PSU work fine. Guess it's now down to CPU & motherboard. Someone has mentioned that I have to check about multiplyer & fsb speed settings, but I can't find any jumpers, only FSB switch which is already set to 100 MHz as …

---

Re: No beeps, no post, no display...

Posted on 2020-07-10, 10:26

by

by maverick1234

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Still no success. Tested 3 processors (Duron 950, Duron 1.2 & Duron 1.3) on 4 diff. motherboards (GA-7ZX (rev. 1.01) , GA-7ZX (rev. 5.00) & 2x GA-7IXE4 (rev. 1.00)), with 2x 128 or 2x 256 SDRAM still no POST, perhaps just once in approx. 60 boot ups & that's it. Used a bit older PSU as provided in …

---

Re: No beeps, no post, no display...

Posted on 2020-07-06, 21:29

by

by maverick1234

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Finally got my POST card and here are the results (and they're the same on both motherboards).

---

Re: No beeps, no post, no display...

Posted on 2020-06-28, 12:18

by

by maverick1234

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Here are the screenshots of both motherboards; same models, different rev. numbers. The one with CPU & RAM installed is rev. 5.0, the other one is rev. 1.01.

---

Re: No beeps, no post, no display...

Posted on 2020-06-28, 08:26

by

by maverick1234

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Still waiting for POST cards to arrive, but I'm rulling out everything except motherboard & CPU; so with that in mind, what motherboard would be recommended? Let's say for a CPU around 1.00 - 1.40 GHz, with AGP 2x slot (Voodoo 3 3000) & ISA slot (SB Pro 2). I would prefer AMD, but I could do with …

---

Re: No beeps, no post, no display...

Posted on 2020-06-24, 09:26

by

by maverick1234

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

If the board has a built-in speaker, do you get beeps when you remove the RAM? Do you have a spare PSU to try? Perhaps the board needs a discharge & new battery. There aren't any beeps coming out whatsoever, regardless if I remove graphics card, RAM,... . Can't even enter BIOS 'cause there's no …

---

Re: No beeps, no post, no display...

Posted on 2020-06-24, 09:22

by

by maverick1234

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Guess: Bad cap, bad PSU or BIOS issue. Have you tried a different PSU? I would strip down to basics and use a good PCI vid card and good PSU that I know work with good (that Trust Powermaster only had a 2 year warranty, where many good PSU back then had 5+) Both mainboards are refurbished & the …

---

Re: No beeps, no post, no display...

Posted on 2020-06-24, 09:20

by

by maverick1234

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

slivercr wrote on 2020-06-23, 23:00: Change the CMOS battery 😀 I've already done that, no effect.

---

No beeps, no post, no display...

Posted on 2020-06-23, 21:17

by

by maverick1234

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I'm having a bit of trouble with booting up the system. I can hear the HDD running, CPU fan is spinning as usual, there are no beeps & no display. Since I don't have a desktop case yet, it's currently running on testbench. And I've also noticed that it turns on whenever I flick the switch on the PSU …

---

Re: Multi-boot pc

Posted on 2020-06-06, 17:12

by

by maverick1234

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Well, here's a minor update........I went ahead and create 6 partitions on a 250 SSD drive, installed Xp, Xp64, Vista, Vista64, Win 7 & Win 7 64; all in MBR partition style. And the boot menu is automatically created. All 6 op. systems are working fine at the moment 😀

---

Re: 16bit ISA connector ?

Posted on 2020-06-05, 13:04

by

by maverick1234

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Yeah, apparently REV. 1.00 has it already installed onboard, mine is REV 1.01 with just an optional ISA (probably same thing with REV. 5.1) :) . Seller stated in the title that it has an ISA slot, even on the provided pictures, that what confused me a bit when I got it. But all in all, I didn't want …

---

16bit ISA connector ?

Posted on 2020-06-05, 03:41

by

by maverick1234

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Hi, my Gigabyte GA-7ZX motherboard (rev. 1.01) came without ISA slot, but it has an optional ISA upgrade. Does anyone know if any company still provides ISA connectors to buy? Because I would really like to make my Sound Blaster Pro 2 useful 😒 Thank you

---

Re: Multi-boot pc

Posted on 2020-06-05, 03:37

by

by maverick1234

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Thank you all for the info.

---