Re: Searching for ET6100 BIOS
Posted on 2024-11-29, 19:18
I’ve got a couple of these 6100’s if anyone needs a bios file.
Re: Evolution of a Socket3 System to a POD @100MHz
Posted on 2024-11-24, 17:25
In case someone else comes across this, what I landed on for L1 cache settings, I set JP21 to position 3-4 for write back and in the bios config I set L1 to WB for Quake or L1 to WT for Duke3d. There are some garbled sound fx when laundhing Duke but plays fine in game. An acceptable compromise for …
Re: My Very Long Bus Adventure.
Posted on 2024-11-24, 10:00
Thanks pshipkov! I think the DRAM speed setting has corrected the issue. My system hangs at the “slower” setting but I’m able to boot at “slowest” which is unfortunate for performance. This card may not be suited for this motherboard so I’ll def try it in a couple others. Who’d of thought dram speed …
Re: My Very Long Bus Adventure.
Posted on 2024-11-23, 21:50
Gotta get an update in here before year end. Found an ATI Mach64 Graphics Pro Turbo VLB! Can anyone comment on the best settings, bios and jumper, to run this board in an ASUS 486SV2GX4 with a POD100? Seeing some junk output at times in DOS or DOS Games, not in Windows though, at least not yet.
Re: MB-5DVP Pentium+VLB+PCI motherboard
Posted on 2024-11-09, 23:22
Been curious about these boards, great write up, thanks for sharing!
Re: Help with Tracking down drivers or demos for BitBoys / Tritech Pyramid 3D *Update, SDK/Demos, OpenGL MCD found!*
Posted on 2024-09-01, 13:17
Hi fragmentfi, curious if you’ve had any luck with the buster master drivers?
Re: Help with Tracking down drivers or demos for BitBoys / Tritech Pyramid 3D *Update, SDK/Demos, OpenGL MCD found!*
Posted on 2024-06-09, 16:25
Awesome stuff!
Re: 3 (+3 more) retro battle stations
Posted on 2024-04-06, 21:08
Oh yah, I’m quite certain that was a Voodoo2 on the 8433. Perhaps I had it paired with a G200, would need to check notes.
Re: 3 (+3 more) retro battle stations
Posted on 2024-04-06, 13:41
The GLQuake/MGA numbers come from @Chadti99 - from his MS-4144 and Biostar UUD boards runing properly. He built a fully stable 180/200mhz PC around the UUD. I will let him clarify here. --- as for phil's benchmarks: they provide minimally automated minimal set of DOS benchmarks. nothing interesting …
Re: Help with Tracking down drivers or demos for BitBoys / Tritech Pyramid 3D *Update, SDK/Demos, OpenGL MCD found!*
Posted on 2024-01-22, 12:44
Good luck!
Re: My Very Long Bus Adventure.
Posted on 2024-01-14, 13:54
I still have it, will probably build a system around it soon.
Re: Help with Tracking down drivers or demos for BitBoys / Tritech Pyramid 3D *Update, SDK/Demos, OpenGL MCD found!*
Posted on 2024-01-14, 13:53
Yes, it's possible this revision just doesn't work with PCI Bus Master.
Re: My Very Long Bus Adventure.
Posted on 2024-01-11, 12:40
Is that the S3 Trio32? Not sure I still have it, let me know. I could source another though.
Re: Help with Tracking down drivers or demos for BitBoys / Tritech Pyramid 3D *Update, SDK/Demos, OpenGL MCD found!*
Posted on 2024-01-08, 21:53
I tried the chipset drivers found here: http://vogonsdrivers.com/getfile.php?fileid=1424&menustate=0 And I've tried moving slot positions and still the system hangs in the same spot. I'll try a few more things. Maybe another Mobo.
Re: Help with Tracking down drivers or demos for BitBoys / Tritech Pyramid 3D *Update, SDK/Demos, OpenGL MCD found!*
Posted on 2024-01-08, 08:06
I’m using an Asus P3B-F with BX chipset. I’ll try chipset drivers and moving slots as mentioned! I hope you’re right, would really like to see some playable frame rates.
Re: Help with Tracking down drivers or demos for BitBoys / Tritech Pyramid 3D *Update, SDK/Demos, OpenGL MCD found!*
Posted on 2024-01-07, 21:08
Without “gl_ztrick 0” the rendering gets trashed so it’s def required. I tried the drivers in the p3d zip and NT won’t allow me to install, maybe they are Win95 only? The drivers in the “p3d_mcd” folder must be bus master only as they crash the same as the bus master drivers in the “p3dnt” folder. …
Re: Help with Tracking down drivers or demos for BitBoys / Tritech Pyramid 3D *Update, SDK/Demos, OpenGL MCD found!*
Posted on 2024-01-07, 15:17
Got it, I pulled the files for now. Mika said it was okay but let me double check. Yes the drivers in the P3DNT folder is what I'm currently using. I'll see if I can give the other drivers a shot!
Re: Help with Tracking down drivers or demos for BitBoys / Tritech Pyramid 3D *Update, SDK/Demos Found!*
Posted on 2024-01-07, 13:44
Some great news guys, Petri Nordlund, who wrote the original drivers came through! I now have GLQuake running in NT4! Temper your expectations though as performance doesn't appear to be optimized, Timedemo1 is showing ~10fps on a 1400Mhz Tualatin. It looks fantastic and even supports 32bit modes, …
Re: Help with Tracking down drivers or demos for BitBoys / Tritech Pyramid 3D *Update, SDK/Demos Found!*
Posted on 2024-01-03, 12:00
Excellent news!
Re: Help with Tracking down drivers or demos for BitBoys / Tritech Pyramid 3D *Update, SDK/Demos Found!*
Posted on 2024-01-03, 10:34
Oh I’ve actually been talking to Mika. I just asked him and he mentioned he would reach out to a friend, who wrote the driver, they might still have them. The SDK files I’ve shared include a Windows NT driver, maybe that’s all we need? Or would it need to have an opengl32.DLL or similar included? I …
Page 1 of 53