Monster Sound MX-400 W2K Drivers???
Posted on 2020-12-24, 15:22
I must be running down the wrong rabbit hole. Anyone have a link to a driver for W2K as nothing jumps out at me over here. http://vogonsdrivers.com/index.php?catid=17 Thanks
Re: Proper hard drive detection on the Abit KV8 mobo w/VIA K8T800 NB & VT8237 SB Win2K?
Posted on 2020-12-10, 17:18
When i installed mint the hard drive was clean with no OS. Remember i could never get win2k installed. So linux mint never had a option to install alongside windows that wasn't there. I will just yank the sata drive and place it into another computer that will natively recognize it. That way i can …
Re: Proper hard drive detection on the Abit KV8 mobo w/VIA K8T800 NB & VT8237 SB Win2K?
Posted on 2020-12-10, 16:25
Dmetsys you were 100% correct about the usb floppy drive. I hooked up a internal floppy and bingo my win2k recognized the driver and installed to the hard drive! Thank you so much as i have been chasing my tail for days! Now i have another issue with my MBR. You see once win2k installs to the hard …
Re: Proper hard drive detection on the Abit KV8 mobo w/VIA K8T800 NB & VT8237 SB Win2K?
Posted on 2020-12-10, 00:34
I have regular ol floppy drives here. So i will plug one in a give it a shot. It does have the setting in the BIOS tho and keys right up. At this point it wont kill me to grab a regular floppy. I have them all over the darn place. I found this on slipstreaming 2k but im not sure if i can go right to …
Re: Proper hard drive detection on the Abit KV8 mobo w/VIA K8T800 NB & VT8237 SB Win2K?
Posted on 2020-12-09, 23:02
It's Win2k Pro and I doubt it has any of the 4 service packs. I think i have owned that disk since day one. I didn't try XP Pro this round but I can go back and try the last drivers i posted. I will need to check if any of my XP disc have any service packs or not. I will see what i can do with the …
Re: Proper hard drive detection on the Abit KV8 mobo w/VIA K8T800 NB & VT8237 SB Win2K?
Posted on 2020-12-09, 22:06
I just dropped a Linux Mint disk in (Sonya 18.2) with both setting for RAID turned off. Mint would have installed but i stopped it after it correctly detected my hard drive and wanted to install.
Re: Proper hard drive detection on the Abit KV8 mobo w/VIA K8T800 NB & VT8237 SB Win2K?
Posted on 2020-12-09, 22:00
I have had them set 7 ways to sunday. Here are the two settings below. When i have both RAID setting toggled on. I can get into the secondary VIA RAID BIOS. When I have just the SATA RAID rom on same deal the VIA RAID shows at post and can be accessed by hitting the TAB button. now If the SATA RAID …
Re: Proper hard drive detection on the Abit KV8 mobo w/VIA K8T800 NB & VT8237 SB Win2K?
Posted on 2020-12-09, 20:48
When using the Sil drivers Win2k said no hard drive found.
Re: Proper hard drive detection on the Abit KV8 mobo w/VIA K8T800 NB & VT8237 SB Win2K?
Posted on 2020-12-09, 19:58
Well i had another idea. On the MAX3 board did the SIL drivers emulate the IDE drives? Maybe i missed the proper SIL driver in my travels.
Re: Proper hard drive detection on the Abit KV8 mobo w/VIA K8T800 NB & VT8237 SB Win2K?
Posted on 2020-12-09, 19:52
Choked again Would my hard drive effect this install procedure on Win2K? It's 250 GB Maxtor SATA1 and it's all in one partition.
Re: Proper hard drive detection on the Abit KV8 mobo w/VIA K8T800 NB & VT8237 SB Win2K?
Posted on 2020-12-09, 18:57
Will do and I will report back in an hour? Thanks!
Re: Proper hard drive detection on the Abit KV8 mobo w/VIA K8T800 NB & VT8237 SB Win2K?
Posted on 2020-12-09, 18:47
As far as your question i have used a few of the drivers from http://download.viatech.com/DriverDownloadSubmitAjaxSvl I struck out on the ones i chose. My mobo
Re: Proper hard drive detection on the Abit KV8 mobo w/VIA K8T800 NB & VT8237 SB Win2K?
Posted on 2020-12-09, 18:33
Here is a snap of my onboard RAID. Notice it doesn't say SIL in the panel? Like this other snap whicj is in the KV8-MAX3 manual?
Re: Proper hard drive detection on the Abit KV8 mobo w/VIA K8T800 NB & VT8237 SB Win2K?
Posted on 2020-12-09, 18:25
Let me explain a little bit more. I have a bastardized board direct from ABIT. The mobo is actually a KV8-MAX3 so the Northbridge is a "K8T800". However my mobo does not have the sata controller at the bottom. If you look at the KV8 PRO it has the "K8T800 PRO" Northbridge. The boards have different …
Re: Proper hard drive detection on the Abit KV8 mobo w/VIA K8T800 NB & VT8237 SB Win2K?
Posted on 2020-12-09, 18:13
The VIA SATA Driver v4.30g: Yep extracted that .ini and put it on it's own floppy & nada. Then i put it on the floppy you see in the pictures & nada.
Re: Proper hard drive detection on the Abit KV8 mobo w/VIA K8T800 NB & VT8237 SB Win2K?
Posted on 2020-12-09, 17:53
I forgot that you need to upload the pictures in reverse. Anyway after looking at these photos again it does say VT8237 in the driver strings. So i have no idea what the issue is. I had read somewhere that the hard drives needed to be slowed down to SATA 1 with the jumpers. I didn't need to do that …
Proper hard drive detection on the Abit KV8 mobo w/VIA K8T800 NB & VT8237 SB Win2K?
Posted on 2020-12-09, 17:35
I'm stuck and the best way to explain this is with pictures. So i hit F6 as soon as Win2k starts just like in XP and this is where i'm at. I have downloaded drivers all over the place and tried the kitchen sink. I have read threads here and all over the net for the last 4 days. I am truly at a loss …
Re: Can't seem to make heads or tails on a proper processor upgrade for abit Fatal1ty AN9 32X AM2
Posted on 2020-12-09, 13:15
Well well well nice link man on the Abit IX58-MAX! thx
Re: Can't seem to make heads or tails on a proper processor upgrade for abit Fatal1ty AN9 32X AM2
Posted on 2020-12-01, 16:01
I am currently stuck on whats the best processor for the abit Fatal1ty AN9 32X AM2 motherboard. It says (BIOS: m601b19.zip) ID:19 Update CPU Micro code to support Athlon 4X50 series and Sempron X2 CPU. http://abit.ws/page/en/motherboard/motherboard_detail.php@pMODEL_NAME=Fatal1ty+AN9+32X&fMTYPE= …
Re: Can't seem to make heads or tails on a proper processor upgrade for abit Fatal1ty AN9 32X AM2
Posted on 2020-11-29, 21:21
Okay pentiumspeed I have a (AMD Phenom II X4 955 Black Edition) here. It's says it's an AM3 CPU. My motherboard is AM2 only. Not AM2+ so this is throwing me a bit. How could a AM3 CPU work in a AM2 only board?
Page 1 of 6