Oh I see. That card is related to the geforce 6 right? I think the issues with the PCIE FX cards was the AGP->PCIE controller, which basically didn't work in windows 98. The native PCIE cards seem to do a bit better. That's right, it's a slightly altered 6800 (I think GT version, with some things …

The FX 1300 is supposedly pretty spotty with windows 98. I'd be interested to see how well you get along with it. I have a somewhat similar FX 1000 quadro. I took the shroud off and replaced the fan with a 55mm one, and then ran the 2 pin fan to a 3pin extension and then into a simple 3 pin fan …

rivaturner helps with noise for fan speed adjust. I have not exactly but kinda a similar in a sort of way build to yours, and the nvidia card at least mine does makes some noise. You just cannot expect 17 year old fans to work silently. Plus I'm sure the internal mechanism is full of junk. Plus …

This is first part of my odyssey to build the killer Windows 98 PC. I Was finally able to cram my killer Windows 98 build into a modern small form factor case. The star of the show is SFF Time P-ATX v2 case. The selection was clear, it is the only case small case that supports full-ATX mother boards …

Hello, I am having an issue where Creative CT4670 (with drivers installed from proper OEM CD supplied by Vogons) works fine in Windows 98SE, but not with DOS games like Doom 2. CT4670 is the SoundBlaster Live! Value OEM edition. I get conflicting messages if it's the Live! 24-bit edition or not. …

Try uncompressing this file into the folder where you uncompressed the driver and then try installing through device manager . NV_mod.zip Hey, thanks. Actually while I waited I tried doing something like that and for whatever reason it didn't work. So I kinda tried it another way, and I think I …

How can one force the driver to install? Simple. Use RivaTuner. But AFAIK you can use it as it is. Forceware drivers had device IDs for Quadro cards, so just match it with similar Quadro card with NV40 chip. Purely hypothetically speaking. If one modifies the Device ID, restarts, and RivaTuner …

I have been trying to get my Quadro FX 3450 to work in Windows 98. I am using Pentium 4 3.0Ghz on 775 Socket with D915GEV mobo. First of all, setting the Video Config in BIOS to PCIE will make Win98 to blackout the moment it loads. But setting the config to PCI, allows Win98 to at least output a …

I have been trying to get my Quadro FX 3450 to work in Windows 98. I am using Pentium 4 3.0Ghz on 775 Socket with D915GEV mobo. First of all, setting the Video Config in BIOS to PCIE will make Win98 to blackout the moment it loads. But setting the config to PCI, allows Win98 to at least output a …

I have been trying to get my Quadro FX 3450 to work in Windows 98. I am using Pentium 4 3.0Ghz on 775 Socket with D915GEV mobo. First of all, setting the Video Config in BIOS to PCIE will make Win98 to blackout the moment it loads. But setting the config to PCI, allows Win98 to at least output a …

Baoran wrote on 2020-11-26, 03:44: Minor mistake. The card is TNT2 M64 and not TNT M64. Fixed. Thanks.

I was building a retro PC and I had the time to run basic benchmarks on every video card I have. I would like to put this info out there in case somebody finds one of those cards in the attic and decides to use them in a retro build. The culprits are: Radeon 9600 XT (Note: Overdrive feature is …

I swapped the hardware setup for an older Intel 815 motherboard, and when I try to install using the same IDE hardware, I get "Your program caused a divide overflow error". Magnificent.

I am attempting to install Windows 98 SE and for whatever reason it fails to run setup. At first I was using a SATA SSD in legacy mode, which Windows 98 SE boot CD detected just fine. I was able to run fdisk and format C:. However, after that it was just black screen. I should mention DVD-Drive was …

If you must have a complete copy, a snapshot from June is available from archive.org: https://archive.org/details/vogons-drivers-snapshot-20200627 Thanks, that's actually fairly helpful. I mean it's not as elegant of a solution, but it will do.

Not sure what sort of vintage you're thinking about. Does the site not work in Lynx, or something? Well, for myself, and the reason I made this thread in the first place, I would like to make a quick 1 line FTP dump from the website. I have a solid server with triple parity where the files will be …

Grzyb wrote on 2020-10-01, 15:11: I'm afraid that bandwidth costs make it necessary to limit mass downloads. Though indeed, FTP would be nice, as it would allow downloads directly to vintage machines. We could also organize a torrent based solution. P2P surely will speed things up.

Is there any way we can have access to the FTP server with the contents of Vogonsdrivers.com? FTP server just makes it so much easier doing mass downloads.