ok, hadn't thought about a scsi card for the unknown one. I have seen the drivers for the reveal fm radio card, can I just plug the output of that card to the line in for the sound blaster? I will take some pictures of the machine, although the front bezel completely fell apart when my brother …

change the last message, the cd-rom is the right one for the ide interface, just was not setting it up right, I posted in Marvin/sound about this. I got it working, but had to change the cd-rom out as the old one only read published cd-roms, the new one reads published cd-roms and cd-rs. I am going …

I have fought this for about 3 weeks and finally figured it out so wanted to post here to help others. Ok first you need the drivers from phil's computer lab https://www.philscomputerlab.com/sound-blaster-awe-32.html , download sbbasics.exe and ctcmbbs.exe. I ran these in their own directories and …

I finally got this computer an tore it down for a good cleaning. the last person had added a 468dx2-50 but it had come out of the socket and broke several pins (replaced it with a 486dx2-66 but still only shows as 486dx-50 though). the cdrom is not the right one for the awe32 interface and the hard …

ok, fingured this out. My brothertok this picture at a bad angle so I was seeing the installed awe32 CARD that was installed in a pci slot, could not see the motherboard at all. I am supposed to get this computer the end of the week so will post futhur updates then. I do know that the front plastic …

That is my problem, I have found a 2155-nm1 but not the 2155-sm1, not sure if they are closely related. I am trying to tell from the picture if this thing has 30-pin or 72-pin sims, there are only two memory slots and they kinda look too long for 30-pin (I cannot zoom into the picture close enough …

I am trying to find specs for this computer IBM PS/1 Machine type 2155 Model Number SM1 I am not going to be able to go get it for a couple of weeks, but I am trying to identify the processor upgradeability and memory requirements. I have a picture of part of the motherboard and it says there is a …

ok my setup works great in win98se, but when i reboot to dos I cannot get my midi output to go to the gameport midi interface. I have an audigy 2 zs setup according to the instructions i found on here, works fine in win98se and goes to the gameport midi and then my mt32-pi. when I reboot to dos it …

I have a laptop, latitude d600, running win98se. I know the um-1ex and um-2ex will run under win98se but will it also run under pure dos. I also have an SD Audigy 2 ZS running both under win98se and pure dos. I have an mt-32 pi that I use as my "Roland mt32/sc55" and it work fine in win98wse right …