Thanks for version 1.39, the RSX is recognized properly again. Now to fully test out the YM2608/2203 features on my new SAAYM.

Here's the values it reads out. 1.35 works great, I've been using 1.33 for about a year without trouble. Just the PC-98 detection seems to have thrown a wrench in the mix. Thanks for this though!

Not sure if this is RSX specific but even with version 1.38 my Tandy 1000 RSX reports as a PC-98. Any other RSX owners to confirm this? Just got an SAAYM and hadn't updated my version in a bit so it came as a surprise.

If you're looking for a period accurate editor for the FB-01 you'll most likely have to look outside the PC. I used a patch editor on an Atari ST for years, still works in an emulator like STEEM too. I believe it was a specific build of YSEDITOR. You'd definitely still be better off with the recent …

No, it's configured properly in the Synth output menu. Simply pressing enter on a compatible VGM file loads SBVGM, even if it doesn't exist in the file system. Is there some option/button I have to press to use the internal VGM player for Mod Master? Looking at older videos it looks like it just …

Saw your filter video, it definitely sounds great. Also didn't know about the native playback, haven't tested it yet. Do I just remove the sbvgm files? My RSX has a tandy sound port at 1E0 instead of the usual C0.

Sorry for all the confusion. OPL2 and OPL3 VGM files work fine in modmaster with a soundblaster, though some can't play due to memory limits, mod master is most likely eating up some of sbvgm's ram and sbvgm can't access the ems memory that mod master can. Tandy VGMs do not work even with the proper …

Yes, it's set to the correct port for sn76489 vgms in the synth output and properly puts the command when loading the vgm, but SBVGM itself doesn't seem to respond to the port acknowledgement. Everything on the mod master setup seems to be properly working, just that the way it loads a file for …

Ok, SBVGM properly inserts the -t1E0 line when playing a file but doesn't report a sn76489 found after "searching for hardware" appears. Then it quickly pops up with "detected hardware can not play VGM" before closing. It works fine if you directly call the file to load right after -t1e0 in the …

Alright, figured as much. Just trying to stretch my Tandy 1000 RSX into as many corners as I can with VGM playback. Thanks though! I haven't tried it out, but this tool might do the job: New VGM to MIDI + OPM + SYSEX tool for YM2151 This sorta works, it is a nice way to get some YM2151 patches onto …

I'm not sure if it's possible but do you think FB-01 and/or IBM Music Feature card support could be done? Not sure how close the YM2164 is to the YM2151 but it would certainly be cool to utiluze those devices for 2151 VGM, and if not then VGM of the few games they support. More just wondering the …

I did mess around with the synth outputs and the sn76489 is set at the correct port but SBVGM still refuses to play the VGMs. It tries to run it for a brief second a quits immediately.

Thanks! That seemed to be the case, MODs works great when I pulled out my Sound Blaster. On the VGM side of things it still references the wrong address for my RSX. I'm able to use command line SBVGM fine, though this player defaults to 378h for Tandy VGMs. Is there any way to make it default to - …

This is great! It's a really nice all-in-one package for all kinds of music in hardware. I've been messing around with this on my Tandy 1000 RSX. First player I've used to actually recognize the DAC. I haven't been able to get it working for MODd or VGM through the DAC/PSSJ-3, though it works great …