Hi Thank you of your help, guys. I got it working and issue was that the voltage jumpers were positioned wrongly so i put all voltage jumpers to Default and it booted. Im getting remembering and learnign again, how the old hardware worked back then. 😀

Hi Earlier this week i got motherboard which has some issues to get recognize memory sticks, usually it gives 48 error code or C1. I have switched many Palomino core Athlon XP CPU:s on that board, but still stuck in C1 or 48 error. This motherboard has JumperFree feature, also when i add CPU i will …

mln wrote on 2024-01-17, 14:18: ToniH wrote on 2024-01-17, 08:07: Here is one of my Intel Celeron Slot1 project, needs a good old retro PC case(from that era). […] Show full quote Here is one of my Intel Celeron Slot1 project, needs a good old retro PC case(from that era). What is this motherboard? …

songoffall wrote on 2024-01-17, 12:40: Here's how I cable manage my rigs, you can use this for inspiration )) Looks very clean and pretty good.

songoffall wrote on 2024-01-17, 12:23: Nice P1. What do you play on it? Is it just P1 166 or MMX? This is non-MMX Pentium 1. I have some games installed, Carmageddon 1 and 2, Duke Nukem3d, Doom 1&2, Transport Tycoon, Transport Tycoon Deluxe...etc

Here is one of my old retro PC. - Intel Pentium 166mhz - Matrox MGA-MIL/2B + Voodoo 2 12mb - 64mb memory - Intel OE board - Sound Blaster AWE 32 CT3620 - 2gb HDD - Windows 95 https://live.staticflickr.com/65535/53469816449_37c2631727_b.jpg https://live.staticflickr.com/65535/53469915135_7c54566086 …

Congrats, friend, those are some sexy builds. Although you might consider using some zipties to make the cable management a bit neater, not so much for aesthetics but to make airflow better. Old parts tend to overheat and die, and old cases aren't really the best for airflow. Hi and thank you of …

Yesterday i bought another Athlon socket A system from Internet. It has Geforce 3 Ti200 or Ti500(not sure yet), Epox EP-8K3A+motherboard(cost me only 35€), but i will share some info when i got that PC.

Here is one of my Intel Celeron Slot1 project, needs a good old retro PC case(from that era).

Here is also some of my systems (these are only few, there is more in my garage) - Top PC has Soltek SL-75KAV motherboard, AMD Thunderbird 1Ghz, Geforce 2 Ti - Yellowed case has Abit BX6 2.0, Intel Pentium II 400mhz, Voodoo 3 3000 PCI, 512mb SDram - And in last photo, lot of laptops(Asus, HP, …

Hi My name is Toni, and im from Finland. I have collected some older PC's for years now and looks like i am somehow addicted good old Retro systems. Here i will show my own system i have collected over the years. Here is photos from some of my rigs: System 1. - AMD Athlon XP 3200+ - Sapphire Radeon …

I tested Geforce with another PCI(Voodoo 3) card installed and windows XP shows Geforce in Device Manager and has no issues. I made backup file of Geforce original VGA Bios and flashed another bios and it does the same thing, after first boot, when restart machine it will not "power up" Geforce.

By the way, yes, try to flash vBIOS again. PS: Surprisingly, these outdated chips (NV30; NV30GL; NV35GL; NV40; G70) can still be purchased from some Chinese suppliers. As well as suitable memory chips. It remains to do the reverse engineering of the PCB itself. It would be nice if someone launched …

1. use a second pci adapter and boot using PCI primary vga. reboot, reboot... check if the device still present in device manager. if it is here - check/replace bios chip. 2. if you have oscilloscope, check VGPU and VMEM, capacitors in the power rail, they may be dead. I will test this, thank you …

I have done most of those things, also i changed 4 capacitors near power connector. This is rare card, costs some hundred bucks to buy working one. If i cannot get this fixed, it will go to my Wall of Retro collection 😀 Thank you 😀

Hi Few months ago i got my very first Geforce FX 5800, which have an detecting issue. When i make a first boot, all works fine, it goes to Windows etc, but when i restart my machine, the motherboard beeps that "no gpu installed" error and does not give signal. Does anyone know what might be the …