VOGONS

Common searches


Search results

Display options

Re: DOS software for ISA IEEE488 GPIB card

the driver, being a .sys one, most likely is configured through an entry in config.sys. What I see is the type 30 parameter has not been specified properly. I think the other parameters have been specififed on the line in config.sys where the driver is being loaded. Please check and verify, also I …

Re: DOS software for ISA IEEE488 GPIB card

What I see in BIOS. Not many options. Mouse connected to IRQ12, for COM - two options ( now pair COM1 - IRQ4 is selected ), for LPT - four options , now LPT1 connected to IRQ7 for printing. Printer works OK. If IEEE card configured ( as per IEEE card switch position ) to IRQ5, then seems, all I need …

Re: DOS software for ISA IEEE488 GPIB card

well the /public/DASGroup/products/OMB-PER/ombperd.exe is all dos install + setup + config software. Is that the one you tried? I've had several GPIB cards, both isa + pci. your isa card is generic, it has generic NEC gpib chip so should work with anything, as long as you know its irq + address. …

Re: DOS software for ISA IEEE488 GPIB card

well the /public/DASGroup/products/OMB-PER/ombperd.exe is all dos install + setup + config software. Is that the one you tried? I've had several GPIB cards, both isa + pci. your isa card is generic, it has generic NEC gpib chip so should work with anything, as long as you know its irq + address. …

Re: DOS software for ISA IEEE488 GPIB card

Thank you so much for replying ! First reference - failed to open - sometimes Omega site do not wish to be browsed by Chrome... Second reference refers to Win versions of cards .... I have to use DOS. At the meantime, have upgraded DOS 5.0 to 6.22 version. Also got answer from Omega dept in EU, and …

DOS software for ISA IEEE488 GPIB card

I own 1989 produced Compaq 386/20e PC, where recently was replaced HDD. Now DOS 5.0 and special Finnigan MAT software are installed and my next task is to get communicating PC with the spectrometer through IEEE488 port. ISA card of my PC seems is produced by Omega, but product is discontinued. Tried …

Re: Compaq Deskpro 386/20e

For regret, all these kind of errors like 1790 and 1782 have led to sad final - my original hard drive, Conner CP3111 ( 110MB ) became unreadable and when is turning it makes whistle sounds. Seems that 30 years of working hard is really too much for him... I have replaced it to another one, also …

Re: Compaq Deskpro 386/20e

Keep in mind your /20e does have intel 385 cache controller and number of cache chips on board. Does your motherboard have 4MB stock or 1MB before adding memory expansion board? Mine is later one using 386/25e same way but with 2 square chips for 32K cache using 385-25 cache controller. Cheers, …

Re: Compaq Deskpro 386/20e

OK, thank you for your help ! Now ( more or less :-) ) undestand why it is ipportant to setup CMOS correltly, otherwise part of HD becomes unreadable. Hence, If I got you corretly, may be ASPI mistake when booting also happens because of incorect setting of number of cylinders , sectors or tracks. …

Re: Compaq Deskpro 386/20e

what hard drive do you have installed? If we are lucky it's gone back to default settings when the battery died. If we are unlucky the drive is dying, but we can check that once we know its set up correctly Still believe, that should be lucky option :-) Hard drive is on the pictures- Conner CP3111. …

Re: Compaq Deskpro 386/20e

what hard drive do you have installed? If we are lucky it's gone back to default settings when the battery died. If we are unlucky the drive is dying, but we can check that once we know its set up correctly Still believe, that should be lucky option :-) Hard drive is on the pictures- Conner CP3111. …

Re: Compaq Deskpro 386/20e

Yes, it worked !!! So, time was set and BIOS reset to it's defaults and PC boots almost normal way already from hard drive. That is good. But not everything is perfect, and there is some unpleasant moments. 1. When booting each time appears warning, that "Unable to open ASPI Manager, ASPIDISK.SYS is …

Re: Compaq Deskpro 386/20e

Sounds like the disk may be bad. Your other PC with a floppy drive should be able to boot off that same disk to check if the disk or drive is at fault. You can also run a scandisk and see if the disk comes up with any errors. The disk contents sound right. Setup.exe is what you would type to enter …

Re: Compaq Deskpro 386/20e

Hi everybody, my name is Serge, first of all I sorry for my English and not so deep knowledge about PC. I own same PC - Compaq DeskPro 386/20e, model 2540 , it is connected to Masspectrometer ( I am chemist :-) ) and everything was working fine, but now Dallas DS1287 RTC clock is dead, an PC returns …

Page 1 of 1