Interesting list! So far only the FX3000 from that list can work with the 45.23 driver, and that driver is the last one that wasn't broken. If found a report that it supported 2k resolutions, so the dual link support under 98 is there, so that's something: https://www.voodooalert.de/board/forum/ …

Ok, sorry to hear, that the card is still broken. If it wasn't bumpgate, I wonder if a new bios would help. Maybe use an external programmer and solder the bios chip if it has no socket. I dont know what bios chip the card uses. So maybe the older driver would be a solution, although I am sceptical. …

An update. Guess I must have done something irreversible to the video card and I don't think I could fix it on my own. It seems the graphical glitch that just appeared has nothing to do with the EDID dongle or anything. I still see them even after connecting the card directly to the monitor, …

1600x900@100hz sounds indeed like a good solution. I would use it, if I could, but it seems that I would also have to go down the EDID route. This thread seems also to imply that dual link is impossible under win98 even with the 45.23 drivers: https://www.vogons.org/viewtopic.php?t=90706 I will …

@Jonsmith0815 Check the number of pins on your DVI port, you might have some cards with dual link. i.e this chinese Geforce FX 5500 PCI has one - https://www.ebay.com/itm/204036143864 The pins on the port don’t tell if the chip supports dual dvi. I have tested around 10 cards that all have a dual …

So, I tried playing around with the modes in PowerStrip and I was able to set some previously unavailable modes and resolutions on a dual link DVI cable, connected according to darry 's recipe . Such modes, for example, as 1024x768@120hz or 1600x900@100hz or 1920x1080@100hz (With some font …

This implies that Apple sold a 6800gt variant with two dual link dvi outputs for their 30” displays in 2004/5 https://www.mactechnews.de/news/article/Nvidi … ich-128075.html

This stage has already been passed and everything that could be squeezed out of Single-Link seems to have been squeezed out now. It remains to try to start a Dual-Link, which would overcome the limits of Single-Link capabilities. But to do this, you need to find a monitor with a DVI Dual-Link …

Looking at the title of this thread, this might not be the right place to discuss Win98 high refresh rates. As anything more than 1080p@60Hz requires DVI dual link, I guess that dual link support was never achieved under windows 98. Looking back at the market in 2004, there seem to be not many …

I tested 4200ti and 6800gt with all drivers from version 29 up to 66.94 with a dual link DVI cable at 1080p with my BenQ 2411Z. Using both driver settings as well as power strip I was unable to achieve any refresh rates above 70Hz. 144Hz was working under XP with the 7900gs, didn’t test the other …

Sound is working using these instructions: https://www.vogons.org/viewtopic.php?f=62&t=71449 System is stable running CS1.5 USB still only at 1.1 I suspect IRQ problems with USB 2.0, as there seem to be many USB 2.0 devices in device manager when enabled, and many different IRQ, both more than when …

Onboard USB on my Foxconn X58 Flaming Blade board with X5675 CPU is not working perfectly and crashes at certain times and settings. Motherboard is not supported and has no drivers for 98. However it works stable after a fresh install and rloew patchmem. GPU is 7900GTX stable with patched 82 drivers …

I tested Powerstrip custom resolutions, but it seems to be broken on this setup. At 1024x768 higher refresh rates up to 100Hz worked, but nothing worked at 1080p, only 60Hz. I read somewhere that the newer drivers are the problem. So I would need to use an older GPU and older drivers maybe. Which …

I tested the slot bracket CF adapters on a P2B PIII, DMA works fine only while using the 80 cables. So the 40 cable was preventing DMA, you need to use 80 cables for these adapters if you want DMA. Also I had file errors when I used only the middle connector for the CF while not connecting anything …

Found a solution: Use 128gb Sata SSD to IDE adapter instead of CF card. DMA in 98 works out of the box, 4in1 435 install fine and also latency patch installs fine. Will test more. Before I was using two CF cards mounted in slot brackets as master and slave via a 40 cable. 80 cable didn’t fit due to …

Did you find a solution? I have the same problem using an almost identical setup with a shuttle 591p mvp3 k6-2 450.

I am again working on this ;) I have the BenQ 2411z 144hz 1080p monitor that supports 144hz only over a dual link DVI cable and not via HDMI. I use it with an Asus 7900gs AGP under 98 and XP. I am having problems getting more than 60hz to work. In 98 the modded drivers don’t offer a setting for …

Interesting thread! I tried a GeForce 7900gs with a xg2401 1080p 144hz Monitor using a dvi to hdmi passive Adapter in Windows xp and 93 drivers, but I couldn’t get more than 60hz or 65hz to work. It turns out that hdmi supports only dvi single link which is 60hz max in 1080p. Now I think about …