240p compatible 1920x1200 or 2560x1440 LCD Monitors
Posted on 2023-09-28, 15:09
Does anyone know if any 1920x1200 or 2560x1440 LCD monitors accept 240p YPbPr signals, over RCA component, and 240p RGB signals, over VGA?
Re: Dual Nvidia GPUs in Windows XP
Posted on 2023-06-09, 14:59
You could grab a pair of cheap GTX 570s or a 570 and 580 and try again, XP has full support for SLI with Fermi cards, once you have gotten results you could then just sell the cards if you dont need them. At the least it would answer the question. Nah, I'll stick with Kepler/Maxwell. I want …
Re: Dual Nvidia GPUs in Windows XP
Posted on 2023-06-09, 14:42
I just wanted to see if I would get a performance boost in XP with a dedicated PhysX card. Before I upgraded from my 980 Ti to a 2070 on my main Windows 10 (now 11) PC, I used a GTX 1650 as a dedicated PhysX card and got a 20FPS boost (65 FPS to 85 FPS) in FluidMark with max settings at 1080p.
Re: Dual Nvidia GPUs in Windows XP
Posted on 2023-06-09, 14:23
I replaced the 780 with a 980 Ti and the 750 Ti with a 960, and the same thing happened. It must have nothing to do with the architecture of the installed GPUs matching each other, but is probably caused by the lack of SLI (and all multi-GPU) support for Kepler and newer GPUs.
Re: Dual Nvidia GPUs in Windows XP
Posted on 2023-06-04, 15:30
I just wanted to experiment and see if I get more FPS in FluidMark, with the 780 alone or with the 750 Ti dedicated to PhysX. I can swap out the 780 for a 960 to see if that makes a difference.
Dual Nvidia GPUs in Windows XP
Posted on 2023-06-04, 05:22
I want my GTX 780 to be the primary GPU, and 750 Ti to be dedicated to PhysX. After installing my 750 Ti in my secondary PCI-e x16 slot, I was prompted to install the drivers for the 750 Ti and then prompted to reboot. After rebooting I get multple error messages when Windows loads, and Nvidia …
Re: Need help with updating BIOS on Azza KT3-AV AMD Socket 462/A Motherboard
Posted on 2022-12-09, 03:12
Here, try this. Works great for me, but I used an external flasher. edit: just looked at my board - it's revision 2.2 - if that helps Mine is Rev. 2.2 as well, what CPU are you using? I tried the BIOS file you sent me and I had the same problem. What did you use to externally flash your BIOS chip?
Re: Need help with updating BIOS on Azza KT3-AV AMD Socket 462/A Motherboard
Posted on 2022-12-09, 00:38
When I get to the A: the first thing I do is type DIR - this displays the name of all of the files as they are named on the disk. There are 21 files listed they are: ASPI2DOS.SYS ASPI4DOS.SYS ASPI8DOS.SYS ASPI8U2.SYS ASPICD.SYS AUTOEXEC.BAT BTCDROM.SYS BTDOSM.SYS COMMAND.COM CONFIG.SYS DRVSPACE.BIN …
Re: Need help with updating BIOS on Azza KT3-AV AMD Socket 462/A Motherboard
Posted on 2022-12-08, 20:38
I tried Uniflash v1.40, and whenever I try to flash the BIOS, with or without bootlock, an error message is displayed which reads, "Error #2: File not found".
Re: Need help with updating BIOS on Azza KT3-AV AMD Socket 462/A Motherboard
Posted on 2022-12-08, 19:50
It would be an easier job with a floppy drive as it's much less trouble to change the flash program, save the old BIOS, etc. - hopefully you have one you can install. I'd try an older version of Awardflash, but I'd try Uniflash prior to that. My case is too small for a FDD at the moment, even …
Re: Need help with updating BIOS on Azza KT3-AV AMD Socket 462/A Motherboard
Posted on 2022-12-08, 19:45
If your 1.8GHz Duron runs at 1.35GHz you've probably configured the board for 100MHz FSB instead of 133MHz. (200/266MHz effectively) Have you tried an earlier BIOS from the same site? There is a jumper cap on JP2, the one for the FSB setting, so it should be running at 133/266MHz. My RAM is running …
Need help with updating BIOS on Azza KT3-AV AMD Socket 462/A Motherboard
Posted on 2022-12-08, 19:00
My current CPU is a Duron 1.8 GHz Applebred, and is misidentified by my bios as an unknown 1350 MHz CPU. The current bios version, B14, is from 2001; the Applebred Durons launched in 2003. I want to update to version B20, so my CPU correctly identified, and so I can possibly upgrade to an Athlon XP …
Re: DVI-D Dual-Link to HDMI 1.3+ Bidirectional Passive adapters/cables
Posted on 2022-11-09, 06:10
I'll stick with my CRT for 98SE, as it's much more convenient and fitting for that OS. Plus, I hate LCD's eye tracking motion blur caused by sample and hold, during fast vertical and horizontal motion/scrolling/panning.
DVI-D Dual-Link to HDMI 1.3+ Bidirectional Passive adapters/cables
Posted on 2022-11-09, 02:23
My Windows 98SE machine has a Geforce FX5500, which only has a DVI-I, a VGA, and an S-Video output. I want to use it on my ViewSonic XG2431 at 1920x1080 @144Hz. Most DVI-D to HDMI cables appear to operate in single link mode mode, even if they have the dual link pins, so they only support up to …
Re: Ti 4600 vs FX 5600 Ultra/5700
Posted on 2022-06-07, 04:55
Btw, your FX 5500 also works with driver version 45.23 but you need to force the installation for the FX5200. I tried that, but it wasn't stable for me; every time I attempted to run dxdiag the computer would black screen and freeze. I'll keep my eye out for a 5600 Ultra, thanks for the info. Edit: …
Ti 4600 vs FX 5600 Ultra/5700
Posted on 2022-06-07, 04:08
Assuming they're the same price, which is the better choice for a 2002/03 late era 98SE DX8.1/DOS machine? I'm currently running an FX 5500 on the 56.64 driver with a Duron 1800 and 512MB PC133 SDRAM. My motherboard (Azza KT3-AV) only supports AGP up to 4x (I chose ISA over AGP 8x), so a card …
Re: Error followed by system crash when attempting to install Final Fantasy VII
Posted on 2022-06-04, 03:44
I downgraded to the 43.45 driver by manually selecting the 5200 Ultra from the list of supported GPUs, and now I'm able to install the game.
Error followed by system crash when attempting to install Final Fantasy VII
Posted on 2022-06-04, 03:20
I'm getting an error that says, "Kernel32 caused a general protection fault in krnl386.exe". My system then freezes and stops responding to mouse clicks, so I then have to press manually restart the PC. System Specs Motherboard: Azza KT3-AV; Socket A; VIA KT133A CPU: AMD Duron 1.8GHz GPU: Nvidia …
Re: Screensavers not working in 98SE
Posted on 2022-06-04, 02:57
I've installed 56.64, and screensavers work now. I'm getting a Kernel32.exe error when trying to install FFVII though.
Screensavers not working in 98SE
Posted on 2022-06-02, 15:00
Every time I try to run a screensaver I get an error message that says: The program has performed an illegal operation and will be shut down. If the problem persists, contact the program vendor. [Insert screensaver name] caused an invalid page fault in module KERNEL32.DLL at 0187:bff7a125. Registers …
Page 1 of 3