I recently bought a similar card with a jumper in one of those positions, and was getting no audio out. I traced the header and found they're connected to pins on the ES1868F meant for hardware buttons for volume up/down/mute. They're shared with pins that read the ISA PNP EEPROM which is the nearby …

Paar wrote on 2021-10-07, 18:40: EDIT: Dump is fine, tested on some cards successfully. Do you (or does anybody) have a dump of the 1M ES981? I have a card with unpopulated spots for the ES690+ROM and I'd like to compare them.

Looks weird The main chip just desoldered itself off the board Yep I had to resolder a bunch of pins on my maxi gamer 3d. I suspect they were never soldered in the first place, just they made enough contact with the pads that it worked for a while. Hmm, interesting. I pulled the larger heatsink off …

Thanks for the tip! I added some spare heatsinks with double-sided thermal tape, and pointed a case fan at them. It definitely helped, but didn't immediately get the card going above 30MHz What did get it going was playing around with the MEMFIFO settings, I narrowed it down to SST_MEMFIFO_TEX=0 to …

I recently came into possession of this card that looks like a Guillemot Maxi Gamer 3D, and have had problems getting it going: guillemot-maxi-gamer3d-voodoo-1.jpg It looks clean (probably cleaned up by the previous owner if there was any visible damage), I've seen a few photos of these with …

I've uploaded drivers for the EBOX 2300, which uses the SiS550 SOC (a precursor to the Vortex86 family). The drivers were found after a long search at a different Chinese systems integrator's FTP site (ICOP), and I had to change some allowed PCI IDs in the .INF files to get them working. I haven't …

I saw the S3D version of Whiplash was uploaded to archive.org in October this year: LINK REMOVED

I finally got the manufactured version of my new 10-button front face PCB, so I've documented everything and merged the "10but" branch to main : ms32.jpg I used to have access to a nice clone i3 3D printer, but all of these prints have been on my personal Ender 3, with black PLA that seems to shrink …

reworked the PCB and faceplate? Will you be uploading that new revision to your Github? Great work. It looks fantastic. Oh and do you have a BOM? Disregard both questions. I'm not super familiar with how Github works....I found your other branch with the updated files and a helpful BOM. https:// …

First time posting on Vogons, I normally hang out on the Overclockers Australia forums. Anyway, I made a 3D-printed 50%-scale MT32 for mt32-pi, and some breakout PCBs for the front and rear panels, which I call the Minisynth 32: https://github.com/grantek/minisynth32 OCAU thread . I'm still spending …