VOGONS

Common searches


Search results

Display options

Re: Problems with Geforce 4Ti 4200 on retro build

Ended up getting an ASUS CUBX-L with a socket 370 CPU at the same speed pretty much. The wire fix is pretty unstable, powering up and down is a lottery if it's going to happen right. Removed the wire and it powers up / powers down just fine, so I wouldn't recommend this to anyone. Just get a better …

Re: Problems with Geforce 4Ti 4200 on retro build

Not sure, this happens when a Voodoo 2 and the Geforce4 are both plugged in. I tried it with just CPU / RAM and these two cards connected and this clicking happens. Also tried another Seasonic 550W Gold PSU I have and the behaviour is the same again. I'm not too bothered though, I decided to get rid …

Re: Problems with Geforce 4Ti 4200 on retro build

Ok, mod is now in. I ended up connecting one of the 3.3v points from the ATX connector, as there's no point tapping all three (they show continuity on the PSU side anyway) to the 3.3v regulator (PCI side). I tried first without the 2 Voodoo 2 cards connected. Guess what, it doesn't freeze anymore! …

Re: Problems with Geforce 4Ti 4200 on retro build

Ok I’ll give it a go tomorrow. I see the two points mentioned here are Vout of the 2 LDOs, one 1.5V 5A near the AGP slot and another at 3.3v 7.5A near the PCI. Why is there even a 1.5v LDO on a 2x AGP slot, I thought those were just 3.3v compatible and not 1.5v like later 4x? I wonder if the …

Problems with Geforce 4Ti 4200 on retro build

Hey everyone, I recently built a Win98SE PC with the following hardware: P3 750Mhz / 100Mhz FSB Gigabyte GA-6BXE Rev1.9 Motherboard (440BX chipset) 512MB Non-ECC SDRAM Geforce 4Ti 4200 128MB (I have both an MSI and Gainward card) Sound Blaster 16 ISA 2x Diamond Voodoo2 12MB in SLI Seasonic Platinum …

Page 1 of 1